Fig. 52: Fitting The Spinner Nose Cone (25012); Table 39: Tightening Torque (25013) - ABB HT588465 Original Operation Manual

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.9 Installing the cartridge group
Fig. 52: Fitting the spinner nose cone (25012)
Part number
25013
Table 39: Tightening torque (25013)
5. Fit the spinner nose cone and secure with washer (25014) and screw. Counterhold the
compressor wheel (25000) by hand and tighten the screw. Observe the tightening
torque.
6. Measure distance Z between spinner nose cone and compressor wheel at no less than
three points around the circumference.
Permissible distance Z:
Permissible difference of the measurements:
© Copyright 2019 ABB. All rights reserved.
A170-M
M8
20 Nm
0.1 – 0.7 mm
± 0.1 mm
HZTL4033_DE
A175-M
M10
40 Nm
Revision C February 2019