3
Press ' or " to toggle VIRTUAL DOLBY between "ON" and "OFF".
4
While "ON" is selected, use \ or | to
change the level setting.
5
Press ENTER to confirm the setting.
• You can exit the Function control screen by pressing FUNCTION or
RETURN.
• VIRTUAL DOLBY (QSURROUND) does not operate on VIDEO CDs and Audio
CDs.
• VIRTUAL DOLBY (QSURROUND) does not operate when you set the
"COMPRESSION" setting in "AUDIO SETUP" to "ON" or set the "SPEAKER"
setting in "SPEAKER SETUP" to "5ch" or "5.1ch".
• VIRTUAL DOLBY (QSURROUND) does not operate when you are using a Digital
connection.
• If the speaker mode is set to "2ch" in "SPEAKER", the setting switches between
"2ch (down mix)" and "
the disc ("Dolby Digital" and "Pro Logic").
• QSURROUND™ is a trademark of QSound Labs, Inc.
• VIRTUAL DOLBY (QSURROUND) does not operate when you play back a disc
recorded using Linear PCM, DTS or MPEG Audio format.
Using the Function Control
ON" depending on the audio modes recorded on
ON
DVD
GB