Setting Up The Monitor; Installing The Monitor Base - HP Compaq Presario,Presario CQ1569 User Manual

3

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.

Installing the Monitor Base

To install the monitor base:
1. Place the base on a smooth, flat surface.
2. Align the pedestal column on top of the base and press down to install.
3. Using both hands, position the monitor over the pedestal base.
NOTE:
fixture; instead see
4. Press down firmly to lock the pedestal base in place. When the base locks, it will make a clicking
sound.
NOTE:
Figure 3-1
4 Chapter 3 Setting Up the Monitor
Do not install the base if the monitor will be used on a wall, swing arm, or other mounting
Mounting the Monitor on page 7
Be sure the pedestal base is securely locked before continuing with the setup.
Inserting the Monitor into the Pedestal Base
in this chapter.
ENWW