Do you have a question about the FRSS2623AS and is the answer not in the manual?
Questions and answers
Peter Quigley
February 9, 2025
how to shutoff ice machine in model # FRSS2623AW
1 comments:
Mr. Anderson
February 11, 2025
To shut off the ice maker in the Frigidaire FRSS2623AS model:
1. Turn off the ice maker. 2. Remove the ice storage bin by lifting it up and out. 3. Empty and clean the ice storage bin with mild detergent. 4. Rinse with clear water and allow it to dry completely. 5. Replace the ice storage bin if needed.
This will stop ice production until the ice maker is turned back on.
This answer is automatically generated
Gail Stadnick
February 9, 2025
Replacement water filter will not snap into place.
1 comments:
Mr. Anderson
February 11, 2025
The replacement water filter may not snap into place in the Frigidaire FRSS2623AS if it is not properly aligned with the filter housing. Ensure that the new filter is unpackaged and inserted using the alignment guide. Push the filter firmly until it engages with the snap-in connector, and listen for a clicking sound. If it still does not fit, check for obstructions in the filter housing or confirm that you are using the correct replacement filter.
This answer is automatically generated
ROGER M KENT
April 7, 2025
how do i get the ice maker measure arm down from shipping position
1 comments:
Mr. Anderson
April 9, 2025
To lower the ice maker measure arm on a Frigidaire FRSS2623AS from the shipping position, remove any item in the freezer that is holding the arm down. The arm should move freely once the obstruction is cleared.
Installation Checklist Welcome to our Doors Thank you for bringing Frigidaire into Handles are secure and tight your home! We see your purchase as the beginning of a long relationship together. Door seals completely to cabinet...
IMPORTANT SAFETY INFORMATION WARNING DANGER Please read all instructions before using DANGER Risk of fire or explosion. this appliance. Flammable refrigerant used. Do not use mechanical devices to defrost refrigera- Safety Definitions tor. Do not puncture refrigerant tubing. DANGER Risk of fire or explosion. This is the safety alert symbol.
Page 4
IMPORTANT SAFETY INFORMATION Safety Instructions Proper Disposal of your Appliance Risk of child entrapment • DO NOT store or use gasoline, or other flammable liquids, or aerosols Child entrapment and suffocation are not within or in the vicinity of this or any problems of the past.
Page 5
IMPORTANT SAFETY INFORMATION WARNING IMPORTANT These guidelines must be followed to Turn off power to your appliance you ensure that safety mechanisms in this must unplug the power cord from the unit will operate properly. electrical outlet. Grounding type wall receptacle Electrical information •...
Crisper Pan Damper/Air filter housing Toe Grille Refrigerator LED Light Cover Slide Out Basket IMPORTANT Accessories are available for your appliance and may be purchased at Frigidaire.com or by calling 1-800-374-4432 (Frigidaire.ca or 1-800-265-8352 in Canada) or from an authorized seller.
INSTALLATION Installation This Use & Care Manual provides general operating instructions for your model. Use the unit only as instructed in this Use & WARNING Care Manual. Before starting the appli- ance, follow these important first steps. Installation clearances Location Allow the following clearances •...
Page 8
INSTALLATION Toe Grille Installation and Removal Guidelines for final positioning of your unit: To install toe grille • Rest all 4 corners of the cabinet Open both doors. Slide the left and right sides of the toe grille over the firmly on the floor.
Page 9
INSTALLATION To level the doors using the adjustable 4. After leveling, verify the door stop lower hinge: contacts the lower hinge and the top of the door does not contact the upper hinge through full movement NOTE of the door (from fully closed to fully open).
DOOR REMOVAL To remove the refrigerator top hinge/cover: Tools Necessary: 1. Remove the 2 screws from the cover over the top door hinge. 2. Lift hinge cover straight up and off. 3. Trace lightly around the door’s top hinge with a pencil. This makes Phillips™...
Page 11
DOOR REMOVAL To remove the freezer top hinge cover: To Disconnect 1. Press outer ring against face of Remove the 2 screws from the cover fitting over the top door hinge. 2. Lift hinge cover straight up and off. 2. Pull to remove tube To Connect Insert tube and push until mark...
DOOR HANDLE INSTALLATION Remove handles from carton and CAUTION any other protective packaging. 2. Position the freezer handle end caps Wear gloves and safety goggles and over the upper and lower pre-in- use extreme CAUTION when installing stalled shoulder bolts (A) that are these handles.
5304490717 (with a 20�copper water line with self-tapping saddle • Chemicals from a malfunctioning valve). Please refer to Frigidaire.com for softener can damage the ice maker. more information. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.
Page 14
WATER SUPPLY CONNECTION Plastic Water Tubing to Ice Maker Fill Tube Steel Clamp Brass Compression Nut Ferrule (Sleeve) Copper Water Line Water Valve Bracket Valve Inlet Water Valve Copper Water Line from Household Water Supply* Braided Flexible Stainless Steel Water Line 6 ft.
CONTROLS AND SETTINGS NOTE Your appliance may have some or all of the features listed below. Become familiar with these features and their use and care. Front of Door User Interface Press the Cube button to get cubed ice. A white LED light will indicate Cube the mode is selected.
Page 16
CONTROLS AND SETTINGS Alarms Power In the event of a power outage the Power Outage indicator appear and Outage an alarm will sound. Press any button to clear the alarm. Door When a door is open the Door Open indicator will appear and will Open disappear when the door is closed.
Page 17
CONTROLS AND SETTINGS In-Door User Interface Inactive Mode View Active Mode View Sleep Mode View...
Page 18
CONTROLS AND SETTINGS In-Door Control Display Mode Views Your display is equipped with a sleep and inactive mode to prevent accidental changes to the unit settings during opening and closing of the doors. When both doors are closed, the display will be in sleep mode. When either door is first opened, the display will be in inactive mode where all the current settings are visible but dimmed.
AUTOMATIC ICE AND WATER DISPENSER Priming the water supply system Turning the ice maker on To turn the ice maker on, press the ice CAUTION maker's On/Off power switch, located on the front of the ice maker, so the LED is For proper dispenser operation, the steadily illuminated.
Page 20
AUTOMATIC ICE AND WATER DISPENSER Ice Maker/Dispenser Tips 4. Allow the ice storage bin to dry com- pletely before replacing it in the freezer. • Ice cubes stored too long may 5. Remove ice chips and clean the ice develop an odd flavor. Empty the ice storage bin, shelf and the freezer container as explained in Cleaning the door chute.
STORAGE FEATURES Glass shelves Crispers Shelves are easily adjusted to suit individ- Crispers allow you the flexibility to store ual needs. Before adjusting the shelves, any manner of items including fruits, veg- remove all food. Shelves are supported etables, nuts, etc. Crispers do not feature by side rails.
NORMAL OPERATING SOUNDS Understanding the Sounds you NOTE may Hear Energy efficient foam in your refrigera- Your new, high-efficiency unit may intro- tor is not a sound insulator. duce unfamiliar sounds. These sounds normally indicate your appliance is oper- ating correctly.
To order your replacement filters, please snap-in connector). visit our online store at Frigidaire.com, by calling toll-free at 1 (800) 372-4432, or by 6. Press a drinking glass against the visiting the dealer where you purchased water dispenser while checking for your refrigerator.
Page 24
Ultra II Air Filter is included in your Liter- ature Pack in the crisper drawer. To order replacement filters, please visit our online store at Frigidaire.com, by calling toll-free at 1 (800) 372-4432, or by visiting the dealer where you purchased your unit.
CARE AND CLEANING Protecting your investment IMPORTANT Keeping your appliance clean maintains If you store or move your unit in freez- appearance and prevents odor build-up. ing temperatures, be sure to completely Wipe up any spills immediately and clean drain the water supply system. Failure to the freezer and refrigerator compart- do so could result in water leaks when ments at least twice a year.
Page 26
CARE AND CLEANING Glass Shelves CAUTION CAUTION To avoid personal injury or property damage, handle the freezer glass shelves To avoid personal injury or property carefully. These shelves are fixed and are damage, handle tempered glass shelves not to be used as sliding shelves. carefully.
Page 27
CARE AND CLEANING Finally, rotate the front trim upward on the To reassemble the freezer shelf, slide the front edge of the glass shelf (Figure 4). glass and rear trim along the shelf rails while pressing the shelf downward until it is fully locked into place in the rear (Figure 3).
Page 28
CARE AND CLEANING Care & Cleaning Tips Part What To Use Tips and Precautions Interior & • Soap and water Use 2 Tbsp of baking soda in 1 qt Door Liners of warm water. Be sure to wring • Baking soda and water excess water out of sponge or cloth before cleaning around controls, light bulb or any electrical part.
If you need us, visit our website, chat with an agent, or call us. We may be able to help you avoid a service visit. If you do need service, we can get that started for you! 1-800-265-8352 (Canada) 1-800-374-4432 (United States) Frigidaire.com Frigidaire.ca CONCERN CAUSE...
Page 30
TROUBLESHOOTING CONCERN CAUSE SOLUTION DISPENSER (Ice & Water) (Continued) Ice dispenser is • Ice has melted and • Remove ice container, thaw, and emp- jammed. frozen around auger ty the contents. Clean container, wipe due to infrequent dry, and replace in proper position. use, temperature When new ice is made, dispenser should operate.
Page 31
TROUBLESHOOTING CONCERN CAUSE SOLUTION OPENING/CLOSING OF DOORS/DRAWERS Door(s) will not • Door was closed too • Close both doors gently. close. hard, causing other door to open slightly. • Refrigerator is not lev- • Ensure floor is level and solid, and el.
Page 32
It actual- ly saves energy run- ning more frequently. DIGITAL TEMPERATURE DISPLAY Digital tempera- • Electronic control • Call your Frigidaire service represen- ture displays system has detected a tative, who can interpret any messag- are flashing. performance problem.
Electrolux or an authorized service company. Product features or specifications as described or illustrated are subject to change without notice. Canada 1.800.265.8352 1-800-374-4432 Electrolux Canada Corp. Frigidaire 5855 Terry Fox Way 10200 David Taylor Drive Mississauga, Ontario, Canada Charlotte, NC 28262 L5V 3E4...
Page 34
Our home is your home. Visit us if you need help with any of these things: owner support accessories service registration (See your regristration card for more information.) Frigidaire.com 1-800-374-4432 Frigidaire.ca 1-800-265-8352...
Need help?
Do you have a question about the FRSS2623AS and is the answer not in the manual?
Questions and answers
how to shutoff ice machine in model # FRSS2623AW
To shut off the ice maker in the Frigidaire FRSS2623AS model:
1. Turn off the ice maker.
2. Remove the ice storage bin by lifting it up and out.
3. Empty and clean the ice storage bin with mild detergent.
4. Rinse with clear water and allow it to dry completely.
5. Replace the ice storage bin if needed.
This will stop ice production until the ice maker is turned back on.
This answer is automatically generated
Replacement water filter will not snap into place.
The replacement water filter may not snap into place in the Frigidaire FRSS2623AS if it is not properly aligned with the filter housing. Ensure that the new filter is unpackaged and inserted using the alignment guide. Push the filter firmly until it engages with the snap-in connector, and listen for a clicking sound. If it still does not fit, check for obstructions in the filter housing or confirm that you are using the correct replacement filter.
This answer is automatically generated
how do i get the ice maker measure arm down from shipping position
To lower the ice maker measure arm on a Frigidaire FRSS2623AS from the shipping position, remove any item in the freezer that is holding the arm down. The arm should move freely once the obstruction is cleared.
This answer is automatically generated