Headphones Connection - NEC E438 User Manual

iring Diagram
Computer (RS-232C)
Power supply to external equipment: 5
V/3 A (max)
: Other signals
: Video signal
: Audio signal

Headphones Connection

When using headphones, connect them to the HEADPHONE terminal of the monitor.
CAUTIONN:
Do not connect the headphones while wearing them.


Otherwise, your ears may be injured depending on the sound volume.
NOTEN:
• Headphones with a stereo mini jack plug can


be connected to the monitor. If the plug of your
headphones is too large to enter the connector, buy
a 6.35 mm stereo jack plug to stereo mini jack plug
adapter in your audio store.
• The sound from the speakers is muted when
headphones are connected.
• Adjustment of the volume control as well as the
equalizer to other settings than the center position
may increase the ear-/headphones output voltage and
therefore the sound pressure level.
AV amplifier
Headphones
External
speakers
English - 26
Video player
(composite)
NOTEN: When connecting the product to the video


output connector (component) of a video player
or another device, go to [Setup] in the OSD
menu -> [VGA Options] -> [VGA Mode], and
select [YPbPr].
VHF/UHF Antenna or Cable
TV Use 75-Ohm coaxial
cable
USB storage device
Computer (stereo mini jack)
Computer (D-sub)
Video player (stereo mini-jack)
Video player (component)
Computer (HDMI)
Video player (HDMI)
Blu-ray or DVD player (HDMI)
HEADPHONE
terminal