System Configuration Menu (Continued)
Select
Boot Options
Diagnostics Menu
Select
Hard Disk Self Test
Maintenance and Service Guide
Table 2-3
To Do This
Set the following boot options:
■
f10 and f12 Delay (sec.)—Set the delay for the
f10 and f12 functions of the Setup Utility in
intervals of 5 seconds each (0, 5, 10, 15, 20).
■
CD-ROM boot—Enable/disable boot from
CD-ROM.
■
Floppy boot—Enable/disable boot from Floppy.
■
Internal Network Adapter boot—Enable/disable
boot from Internal Network Adapter.
■
Boot Order—Set the boot order for:
❐
USB Floppy
❐
ATAPI CD/DVD ROM Drive
❐
Hard drive
❐
USB Diskette on Key
❐
USB Hard drive
❐
Network adapter
Table 2-4
Diagnostics Menu
To Do This
Run a comprehensive self-test on the hard drive.
Troubleshooting
2–7