Installing The Encryption System Software And Smart Card Reader - HP OmniBook 7100 User Manual

2

Installing the Encryption System software and Smart Card Reader

Installing the Encryption System software and Smart Card Reader
Note
1-6
Before you begin installation, make sure your OmniBook's CD-ROM drive is
correctly installed.
1 Start your OmniBook (log on as Administrator for Windows NT). You should
have the Windows desktop displayed
2 Insert the HP Encryption System Software CD-ROM into the CD-ROM drive of
your OmniBook.
3 Start your Windows program installation utility (Start, Settings, Control panel,
Add/Remove Programs) and install the Encryption Smart Card Security System
software from the CD-ROM.
During the installation process you will be asked to install the smart card reader
in an available PCMCIA slot in your OmniBook (the smart card reader is
installed with the label facing upwards).
The software will be installed in the
Packard\HP Encryption System\
specify a different one if you wish.
Your Secure folder will be
change this if you wish.
Your OmniBook will be restarted when the installation is complete.
If you are using Windows 95, you have now finished the installation. Proceed to
"Initializing your smart card and creating a recovery file" on page 10.
For Windows NT users, you are now ready to register the Administrator and User
smart cards for use with NT Logon.
C:\Program Files\Hewlett-
directory by default, but you can
by default, and again, you may
C:\Private