Frigidaire PCFI3668AF Installation Instructions Manual page 7

36" INDUCTION RANGE INSTALLATION INSTRUCTIONS
Island installation
If the appliance is installed as an island:
1. Unscrew the screws indicated.
2. Remove the spacers (C).
3. Insert the screws that were previously removed
into their seats.
Keep a minimum clearance of 5 7/8" (150 mm)
between the appliance and the other furnishings or
decorative elements according to the diagram
below.
The side cabinet depth (clearance A) must match
the front edge of the range side panel:
Unpacking, moving and
positioning the range
CAUTION
This unit is designed as a cooking
appliance. For safety reasons, never use it for
warming the room or as a space heater.
• It is recommended that the front kick panel, the
backguard and oven racks be removed to facili-
tate handling. This will reduce the weight for mov-
ing.
• When positioning the appliance during installa-
tion, do not use the door handle to lift or move the
appliance.
• The appliance can be moved with a hand dolly or
with a clamp lift truck (not with a fork lift truck) only
if it is still packaged.
• Wear gloves to avoid cutting fingers on sharp
edges during installation.
• Remove the outer carton and packing material
from the shipping base.
• Before moving range ensure legs are installed
completely.
• Due to its weight, after removing the packing
material, move it with the help of a second person.
• The floor under the legs should be protected
(wood, strips, carpet, paneling, etc.) before push-
ing the unit into position.
7