Siemens SN23EC14CG User Manual
Hide thumbs Also See for SN23EC14CG:
Table of Contents

Advertisement

Quick Links

Dishwasher
SN23EC14CG
en
User manual
Register your product on My Siemens and discover
exclusive services and offers.
siemens-home.bsh-group.com/welcome
The future moving in.
Siemens Home Appliances

Advertisement

Table of Contents
loading

Summary of Contents for Siemens SN23EC14CG

  • Page 1 Dishwasher SN23EC14CG User manual Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
  • Page 2: Table Of Contents

    Table of contents Safety ..........   4 Folding prongs ....... 22 General information...... 4 Basket heights........ 22 Intended use........ 4 Before using for the first time ..   23 Restriction on user group.... 4 Performing the initial configura- Safe installation ........ 5 tion.......... 23 Safe use ........... 6 Damaged appliance ...... 7 Water softening system....
  • Page 3 Customer Service......   56 Terminate programme.... 33 Product number (E-Nr.), produc- Switching off appliance .... 33 tion number (FD) and consecut- Basic settings........    34 ive numbering (Z-Nr.) ..... 57 Overview of basic settings ..... 34 Technical specifications....   57 Changing basic settings.... 35 Information regarding Free and Open Source Software .... 58 Home Connect ......
  • Page 4: Safety

    en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner.
  • Page 5: Safe Installation

    Safety en Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. ▶ When installing and connecting the appliance, follow the in- structions in the manual and installation instructions. WARNING ‒ Risk of electric shock! Improper installation is dangerous.
  • Page 6: Safe Use

    en Safety WARNING ‒ Risk of burns! If the appliance is not installed properly, this may result in burns. ▶ With free-standing appliances, ensure that they are installed with the back panel against a wall. Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause serious harm to health.
  • Page 7: Damaged Appliance

    Safety en WARNING ‒ Risk of scalding! If you open the appliance door while the programme is run- ning, hot water may splash out of the appliance. ▶ Open the appliance door carefully if the programme is still running. WARNING ‒ Risk of tipping! Overfilling the Baskets may cause the appliance to tip up. ▶...
  • Page 8: Risk To Children

    en Safety ▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and turn off the water tap. ▶ "Call Customer Service." → Page 56 ▶ Repairs to the appliance should only be carried out by trained specialist staff.
  • Page 9 Safety en WARNING ‒ Risk of crushing! With higher-level appliances, children can become crushed between the appliance door and cabinet doors underneath. ▶ Keep an eye on children when opening and closing the ap- pliance door. WARNING ‒ Risk of chemical burns! Rinse aid and detergent may cause chemical burns to the mouth, throat and eyes.
  • Page 10: Preventing Material Damage

    en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡...
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en So as not to scratch the finish AquaSensor ▶ on the appliance, do not use The AquaSensor is an optical meas- sponges with a rough surface or uring device (light barrier) which abrasive cleaning agents. measures the turbidity of the rinsing To prevent corrosion, do not use ▶...
  • Page 12: Installation And Connection

    en Installation and connection Check the Scope of supply and Installation and connection Installation and connec- the condition of the appliance. tion Consult the installation instructions for the installation dimensions re- Installation and connection quired. Scope of supply Make the appliance level using the height-adjustable feet.
  • Page 13: Drinking Water Connection

    Installation and connection en The connection data for the appli- Drinking water connection ance can be found on the rating Connect your appliance to a drinking plate. water connection. Check that the mains plug is inser- ted properly. Installing the drinking water connection Note ¡...
  • Page 14: Familiarising Yourself With Your Appliance

    en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 57.
  • Page 15: Controls

    Familiarising yourself with your appliance en "Detergent" → Page 27 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 21 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 23 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket.
  • Page 16 en Familiarising yourself with your appliance 3 4 5 6 "Switching on the appliance" → Page 31 ON/OFF button and reset button "Switching off the appliance" → Page 33 "Terminating the programme" → Page 33 "Programmes" → Page 17 Programme buttons Display The display shows information about the remain- ing running time or the basic settings.
  • Page 17: Programmes

    Programmes en Programmes Programmes You can find an overview of the pro- ning time will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
  • Page 18: Information For Test Institutes

    en Programmes Programme Programme sequence Additional func- tions → "Additional Tableware: Time-optimised: ¡ Cleaning mixed table- ¡ Cleaning 65 °C functions", Speed 65° ware and cutlery. Page 19 ¡ Intermediate rinse Level of soiling: ¡ Final rinse 69 °C ¡ Removing common ¡ Drying household food remnants lightly dried-on.
  • Page 19: Additional Functions

    Additional functions en Tip: You can use the Home Connect Additional func- app to download additional pro- tion grammes and save them to the ¡ The additional function button. can be activated before the start of the pro- Save Favourite on the gramme and at any appliance.
  • Page 20: Features

    en Features Press in the levers on the right and Features Features left on the outside of the basket. You can find an overview of the pos- Features sible features of your appliance and how to use them here. These features depend on the model of your appliance.
  • Page 21: Bottom Basket

    Features en Arrange cutlery with the points and Bottom basket sharp edges downwards. Arrange pans and plates in the bot- tom basket. Etagere Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery.
  • Page 22: Folding Prongs

    en Features Folding down prongs Folding prongs If you do not need the prongs, fold Use the folding prongs to position them down. tableware securely, e.g. plates. Push the lever forwards and fold down the prongs ⁠ . You can fold the prongs down to po- sition pans, bowls and glasses To use the prongs again, fold them better.
  • Page 23: Before Using For The First Time

    Before using for the first time en "Set the amount of rinse aid to be Before using for the first time Before using for the dispensed." → Page 26 first time "Add detergent" → Page 27. Start the Programme with the Configure the settings for initial start- Before using for the first time highest cleaning temperature without tableware.
  • Page 24: Setting The Water Softening System

    en Water softening system Water hardness °E Hardness range mmol/l Setting value 39 - 62 Hard 5.5 - 8.9 Note: Set the water hardness determ- ter hardness: the higher the water ined on your appliance. hardness, the greater the amount of → "Setting the water softening sys- special salt required.
  • Page 25: Switching Off The Water Softening System

    Water softening system en Note: Only use special salt for erally only be used up to a water dishwashers. hardness of 26  °E without adding Do not use salt tablets. special salt. Do not use table salt. ¡ The water hardness is 0 - 8 °E. You do not need to use special Add the special salt to the dis- salt.
  • Page 26: Rinse Aid System

    en Rinse aid system Add rinse aid up to the max mark. Additional water consumption in litres Additional power consumption in 0.05 The consumption values specified are laboratory measurements determ- ined in accordance with the currently applicable standard and using the Eco 50°...
  • Page 27: Switching The Rinse Aid System Off

    Detergent en To save the settings, press Modern, powerful detergents mainly for 3 seconds. use a low-alkaline formulation with enzymes. Enzymes break down starch and remove protein. Oxygen- Switching the rinse aid sys- based bleaching agents are generally tem off used to remove coloured marks, e.g. tea or ketchup.
  • Page 28: Unsuitable Detergents

    en Detergent Tip: Suitable detergents are available Unsuitable detergents online via our website or from "Cus- Do not use detergent which could tomer Service" → Page 56. cause damage to the appliance or Separate detergents present a risk to health. Separate detergents are products Detergent Description that do not contain components other...
  • Page 29: Adding Detergent

    Tableware en ¡ The function of rinse aid is limited Close the lid of the detergent dis- with combined detergents. You will penser. generally get better results using rinse aid. ¡ Use tablets with a special drying performance. Adding detergent To open the detergent dispenser, press the locking latch.
  • Page 30: Damage To Glass And Tableware

    en Tableware Damage to glass and table- Cause Recommendation ware The water temperat- Select a programme ure of the programme with lower temperat- Avoid damage to glass and table- is too high. ures. ware. After the programme has ended, take glass- Cause Recommendation ware and cutlery out...
  • Page 31: Removing Tableware

    Basic operation en To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin.
  • Page 32: Setting A Programme

    en Basic operation Setting a programme Starting the programme To adjust the wash cycle to the soil- Press ▶ ing level of the tableware, select a a The programme has ended when suitable programme. the display shows "0h:00m". Press the right programme button. ▶...
  • Page 33: Terminate Programme

    Basic operation en few minutes and then close it. This will help prevent excess pressure building up in the appliance and stop the appliance door bursting open. Press ⁠ . a The programme is saved and the appliance switches off. Press to resume the pro- gramme.
  • Page 34: Basic Settings

    en Basic settings Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07 Set the water softening system to your water hardness.
  • Page 35: Changing Basic Settings

    Basic settings en Basic setting Display text Selection Description autoOpen Dry o00 - o02 Activate or deactivate automatic opening of the appliance door during the drying phase. The following settings are possible: ¡ With the setting "o00" automatic door opening is deactivated in all programmes.
  • Page 36: Home Connect

    en Home Connect Home Connect quick start Home Connect Home Connect Connect your appliance to a mobile This appliance is network-capable. Home Connect device quickly and easily. Connect your appliance to a mobile Installing app device to control its functions via the Home Connect app. Install the Home Connect app on The Home Connect services are not your mobile device.
  • Page 37: Home Connect Settings

    Home Connect  en ance connected to the Home Con- Home Connect settings nect server and if Remote Dia- Adapt Home Connect to your needs. gnostics is available in the country in You can find the Home Connect set- which you are using the appliance. tings in the basic settings for your ap- Tip: For further information and de- pliance.
  • Page 38: Cleaning And Servicing

    Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service.
  • Page 39: Filter System

    Cleaning and servicing en Phase Removal of Detergent Placement Food remnants and de- Machine cleaner Detergent dispenser posits To ensure optimum cleaning perform- Remove any coarse soiling in the ance, the programme doses the de- interior with a damp cloth. tergents independently of each an- Clean the filters.
  • Page 40 en Cleaning and servicing Press the locking catches Cleaning filters gether and lift the coarse filter out Soiling in the dishwashing water may ⁠ . block the filters. After each wash check the filters for residue. Turn the coarse filter anticlockwise and remove the filter system ⁠...
  • Page 41: Cleaning Spray Arms

    Cleaning and servicing en Cleaning spray arms Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove ⁠ . Pull up the lower spray arm to re- move.
  • Page 42: Troubleshooting

    en Troubleshooting Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 43: Error Code / Fault Display / Signal

    Troubleshooting en Fault Cause Troubleshooting Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de- ▶ wide at the end of the pro- ted. scribed in the installation instruc- gramme. tions. The door gap must be at least 70 mm - 100 mm.
  • Page 44 en Troubleshooting Fault Cause Troubleshooting E:32-00 will light up altern- Remove the filter from the supply ately or indicator for water hose supply lights up. Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
  • Page 45: Washing Results

    Troubleshooting en Fault Cause Troubleshooting A different error code ap- A technical fault is present. Press . pears in the display window. Unplug the appliance or switch off the fuse. E:01-00 to E:90-10 Wait at least 2 minutes. Insert the mains plug of the appli- ance in a socket or switch on the fuse.
  • Page 46 en Troubleshooting Fault Cause Troubleshooting Tableware is not dry. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- Activate Extra Dry. ▶ prove drying performance. Tableware removed too Wait until the programme ends. early or drying process not Only remove tableware 30 minutes yet ended.
  • Page 47 Troubleshooting en Fault Cause Troubleshooting Remnants of food on table- Filters are soiled. Clean the filters. ▶ → "Cleaning filters", Page 40 ware. Filters are inserted incor- Insert the filters properly. → "Filter system", Page 39 rectly and/or not engaged. Engage the filters. Washing programme selec- Select a more intensive washing ▶...
  • Page 48 en Troubleshooting Fault Cause Troubleshooting Water marks on plastic Due to laws of physics Select a more intensive pro- ▶ parts. droplet formation on plastic gramme. → "Programmes", Page 17 surfaces is unavoidable. After drying water marks are Position tableware at an angle. ▶...
  • Page 49 Troubleshooting en Fault Cause Troubleshooting Tea residue or lipstick marks Too little detergent is being Use a suitable "Detergent " ▶ → Page 27 and follow the manufac- on tableware. used or is unsuitable. turer's instructions for the amount to be used. Tableware has been pre- Only remove large remnants of food ▶...
  • Page 50 en Troubleshooting Fault Cause Troubleshooting Plastic parts are discol- Tableware has been pre- Only remove large remnants of food ▶ oured. cleaned too intensely. The and do not prerinse tableware. sensors chose a weaker pro- gramme. Stubborn soiling cannot be entirely removed. Removable streaks are Amount of rinse aid to be Set the rinse aid system to a lower...
  • Page 51: Home Connect Problem

    Troubleshooting en Fault Cause Troubleshooting Rust spots on cutlery. Cutlery is not sufficiently Use rust-resistant tableware. ▶ rust-resistant. Knife blades are often more severely af- fected. Cutlery may also rust if Do not wash rusting items. ▶ washed together with rust- ing items.
  • Page 52: Information On Display Panel

    en Troubleshooting Information on display panel Fault Cause Troubleshooting Add "Special salt" → Page 24. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶...
  • Page 53: Mechanical Damage

    Troubleshooting en Fault Cause Troubleshooting Appliance does not start. Mains cable is not inserted. Check whether the socket works. Check whether the mains cable is properly inserted in the socket and on the rear of the appliance. Appliance door is not closed Close the appliance door.
  • Page 54: Noise

    en Troubleshooting Noise Fault Cause Troubleshooting Filling valves making knock- Caused by the domestic in- Can only be remedied in the do- ▶ ing noises. stallation. No appliance fault mestic installation. present. Does not affect functioning of the appliance. Knocking or rattling noise. Spray arm is striking table- Arrange tableware so that the spray ▶...
  • Page 55: Clean Wastewater Pump

    Transportation, storage and disposal en Insert the pump cover and press Clean wastewater pump down ⁠ . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned.
  • Page 56: Protect Appliance From Frost

    en Customer Service Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely.
  • Page 57: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)

    Technical specifications en which your appliance was placed on Power rating 2000 - 2400 W the market within the European Eco- Fuse 10 - 16 A nomic Area. Power consumption Off mode/standby Note: Under the terms of the manu- mode: 0.50 W facturer's warranty the use of Cus- Left-on mode: 0.50 W tomer Service is free of charge.
  • Page 58: Information Regarding Free And Open Source Software

    A detailed RED Declaration of Con- documents). Alternatively, you can formity can be found online at send a request to oss- www.siemens-home.bsh-group.com request@bshg.com or to BSH Haus- among the additional documents on geräte GmbH GmbH, Carl-Wery-Str. the product page for your appliance.
  • Page 60 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001584971* 9001584971 (010119) 650 V1...

Table of Contents