Table of Contents
Advertisement
Using the BC2030™ Radio Base
Radio Base LEDs
LEDs on the QuickScan Base provide information about the
Base as well as battery charging status, as shown in
Figure 6. QuickScan Base LEDs
YELLOW LED
RED LED /
GREEN LED
Table 1. Radio Base LEDs
Power on /
Data
Charging
Charge com-
pleted
Charging +
Charge com-
pleted
Quick Reference Guide
LED
Yellow On = Base is powered
Yellow Blinking = Base receives data
and commands from the Host or the
Reader.
Red On = the Battery is charging.
Green On = the Battery is completely
charged.
Red and Green Blinking together =
the Reader is not correctly placed
onto the Base.
Connecting the Base Station
STATUS
Figure
6.
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the QuickScan BC2030 and is the answer not in the manual?
Questions and answers
I need help setuping up datalogi scanner
To set up the Datalogic QuickScan BC2030 scanner, follow these steps:
1. Configure the Base Station – Set up the base station according to the instructions.
2. Charge the Batteries – Ensure the batteries are fully charged before use.
3. Link to the Base Station – Establish a connection between the scanner and the base station.
4. Select Additional Settings – Configure any required settings for proper operation.
This will prepare the scanner for use with its host system.
This answer is automatically generated