Advertisement
5
Replace the rear cover of the projector.
Turn on the projector
1
Plug in the projector.
2
Press the
power button on the projector or the projector remote
control. The
power light flashes blue, then stays on.
3
Press the Enter button on the projector remote control to scroll through
the Welcome Guide. To use Android TV and video-on-demand features,
home and Enter buttons to pair the remote control
press and hold the
to the projector.
4
The default language of the menu system is English. To select another
language, press the
menu button on the projector remote control.
Select Settings and press Enter. Select Language and press Enter. Select
your language and press Enter. Press the
Note: To shut down the projector, press the
or the projector remote control, then press the button again to confirm, if
necessary.
Adjust the image
1
Move the focus lever on top of the projector left or right to adjust the
image sharpness.
2
To adjust the image height, press and hold the foot release lever on the
bottom of the projector to extend the front adjustable foot. Release the
lever to lock the foot in the desired position.
menu button to exit.
power button on the projector
Using the projector remote
control
Install the batteries as shown (two AAA batteries).
Turn projector on or off
Connect to video-on-
demand apps
Go back to previous
function
Enter a selection
Access projector menus
Turn volume up or down
Control playback of
connected device
Note:
• You must pair the projector remote control to the projector to use Android TV
and video-on-demand features. See the online User's Guide for more
information.
• The remote control for Android TV is only used to control the streaming
device if it is connected to a different device or projector. See the online
User's Guide for more information.
Troubleshooting
•
If you see a No signal message after turning on the projector, check the
following:
•
Make sure the streaming device is properly connected to the HDMI
extension cable and the USB power cable.
•
For external video sources, make sure an HDMI cable is properly
connected to the projector's HDMI extension cable.
•
If you see a blank screen, check the following:
•
Make sure the
power light on the projector is blue and not
flashing.
•
Press the
power button to wake the projector from standby or
sleep mode, if necessary.
•
If you see a blank screen when a computer is connected, check the
following:
•
On some Windows
laptops, you may need to hold down the Fn key
®
and press F7 or the function key that lets you display on an external
monitor. It may be labeled CRT/LCD or have an icon such as
On Windows 7 or later, hold down the Windows key and press P at
the same time, then click Duplicate.
•
If you're using a Mac laptop, open System Preferences and
select Displays. Click the Arrangement tab and select the Mirror
Displays checkbox.
•
If the projector does not respond to remote control commands, make sure
the batteries in the remote control are installed correctly. Replace the
batteries if necessary.
•
The projector's USB power cable can provide 2.0A of power. Make sure
your streaming device supports this specification.
Microphone
Turn off audio and
video temporarily
Display the Android TV
home screen
Navigate menus
Operate Android TV features
using voice commands
Adjust image shape
(keystone)
.
Advertisement
