Charge Lamp - Toshiba B-EP800-CHG-QM-R Owner's Manual

2. Connect the AC adapter to the battery
charger.
3. Connect the power cord to the AC
adapter.
4. Connect the power cord to an AC
outlet.
5. Insert the battery pack into the slot in the
orientation shown below.
The CHARGE lamp will light up and charging
will begin.
NOTE:
Insert an appropriate size of the battery pack
according to the partition's orientation.
Failure to do this may damage the battery
pack or affect charging operation.
The CHARGE lamp indicates a charging status.

CHARGE lamp

OFF
Red
Green
Blinking red
6. After charging is completed, remove the battery pack from the battery charger.
7. Disconnect the power cord from the AC outlet.
State
Unconnected.
NOTE:
Charged.
The green light does not go off until the
Completed.
battery pack is removed from the slot.
Abnormal state
11