Table of Contents
Advertisement
1GBase-T (J8177D) transceiver support restrictions in the 48-port 8325 switches
Beginning with software release 10.03, the Aruba 8325-48YBC switches also support 1GBase-T (J8177D)
transceivers in all top row and middle row ports. The bottom row ports do not support 1GBase-T (J8177D)
transceiver operation.
Figure 25: 1GBase-T transceiver support for the 48-port 8325 switches
1
2
3
Table 26: 1GBase-T transceiver support for the 48-port 8325 switches
Label
1
2
3
Ports not occupied by a J8177D RJ-45 transceiver continue to support optical, DAC, or AOC products.
If the switch detects a 1GBase-T (J8177D) transceiver in any bottom row port, the show interface brief
command will list an Incompatible interface for that port.
10GBase-T (JL563A) transceiver support restrictions in the 48-port 8325 switches
Beginning with software release 10.03, the Aruba 8325-48YBC switches also support 10GBase-T (JL563A)
transceivers in the following top row and middle row ports:
Figure 26: 10GBase-T transceiver support for the 48-port 8325 switches
1
2
3
Table 27: 10GBase-T transceiver support for the 48-port 8325 switches
Label
1
2
3
Ports not occupied by a JL563A RJ-45 transceiver continue to support optical, DAC, or AOC products.
To enable use on ports 13-17, Interface-Group 2 must be set to 10G operation.
42
1
4
7
10
13
2
5
8
11
14
Description
All top row ports support 1GBase-T (J8177D) transceivers.
All middle row ports support 1GBase-T (J8177D) transceivers.
Bottom row ports do not support 1GBase-T (J8177D) transceivers
1
4
7
10
13
2
5
8
11
14
Description
Top row ports 1, 4, 7, 10, 13, 16 support 10GBase-T (JL563A) transceivers.
Middle row ports 2, 5, 8, 11, 14, and 17 support 10GBase-T (JL563A) transceivers.
Bottom row ports do not support 10GBase-T (JL563A) transceivers
16
19
22
25
28
17
20
23
26
29
16
17
Aruba 8325 Switch Installation and Getting Started Guide
31
34
37
40
43
32
35
38
41
44
46
47
Advertisement
Table of Contents
Troubleshooting
