Operation Instructions & Attentions - Hutt W55 Product Manual & Warranty Card

glass
don't make t he mop all wet, and do not spray on the track.In standby mode, press
and hold the round key for the track to rotate automatically, and wipe the dirt on the track
surface with a clean wet cloth.
Pay attention to the cloth should not be too wet, dirty cloth is recommended to clean and
dry before use .
Please use original cloth, non-original cloth will affect the machine performance.
Turn on the bottom power switch，
When the machine finishes cleaning the window and stops working, hold the safety
rope in one hand and press the round button until the suction decreases.Then take off
the machine.
（In case of loss of remote control）
clean water on the mop. Please
5-6
turn off the bottom power switch.