Electrolux AEG PWE3810-M User Manual page 18

18 Maintenance and cleaning
Drainage of the water tank
Warning If you had to stop pressing the power icon, please press it again and keep it pressed in
order to complete the step
Warning After the procedure always remember to close the water discharge tap to avoid water
leakage
1. Dispense all the available ice shards
2. Remove the grid of the drip tray to easily pull out the Refreshment Centre. After extracting the
appliance, place the grid back in its original position
3. Connect the plastic hose to the discharge water nozzle
4. Place a big container underneath the plastic hose or put the hose in a sink
5. Press the power icon until power LED starts flashing
6. Remove the safety screw and open the water discharge tap
7. Press the power icon again and keep it pressed until the power LED stops flashing
8. Close the water discharge tap and reinsert the safety screw
9. Restart the appliance using the power switch
10. Push back the appliance until it is locked into position
Food grade CO bottle replacement
Warning While screwing on the new CO bottle, CO leaks might occur
₂
₂ ₂