S
F
P E C I A L
E AT U R E S
Selecting a Signal Source (Antenna or Cable) for PIP
1
Press MENU to display
the menu.
Press CH
four times
to select the PIP menu.
Press VOL + to select
the PIP menu.
2
Press CH
four times to
select "ANT/CATV."
If an antenna is connect-
ed, the setting is "ANT."
If a Cable TV system is
providing the signal, press
VOL + or VOL - until the
appropriate type of cable
system is is displayed
("STD," "HRC," or "IRC").
Press MENU twice to exit.
Selecting a Signal Source (External A/V) for PIP
Press TV/VIDEO repeatedly to cycle through all of the available
signal sources:
"TV," "Video 1," "Video 2," "Video 3," "S-Video 1,"and
"S-Video 2."
Swapping the Contents of the PIP image and Main image
When you press the SWAP button:
The image in the PIP window will appear on the main
screen, and vice versa.
For more information about
external A/V components and sig-
nals, see "Viewing a VCR or
Camcorder Tape" on page 3.14.
If you select "TV", the PIP image is
the same as the main image.
C
F
: S
F
HAPTER
OUR
PECIAL
4.12
EATURES