Using Brightlink With A Computer; Adjusting The Pen Operation Area - Epson BrightLink EB-725Wi User Manual

Using BrightLink with a Computer

You can connect a computer to the projector and install the Easy Interactive Tools software from the
website. Make sure your computer is connected to the USB-B1 or USB-B2 port on the projector with a
USB cable. If you use the USB-B2 port, you may need to adjust the USB-B2 setting in the Pen/Touch >
PC Interactivity menu. You can then do the following:
• Use the pens or your finger as a mouse to control your computer
• Use the Easy Interactive Tools software to annotate with both pens or a combination of pen and finger
touch at the same time
Note: A Touch Unit is optional and must be installed for finger touch operation.
Note: See the online Easy Interactive Tools Operation Guide for detailed information.
• Save and print your annotations
• Use the Tablet PC input panel in Windows 10, Windows 8.x, or Windows 7
• Use Ink Tools for annotation in Microsoft Office (2007 or later) applications
• Connect to a remote computer and control it with the interactive pens or your finger

Adjusting the Pen Operation Area

Easy Interactive Tools
Parent topic:
Adjusting the Pen Operation Area
If you connect a different computer or adjust the computer's resolution, the pen operation area is
adjusted automatically to match your mouse pointer position. If you notice that the pen position is
incorrect when using PC Interactive mode, you can adjust the pen area manually.
Note: Manual adjustment is not available when projecting from a LAN source.
1. Project your computer's desktop.
2. Press the Menu button, select the Pen/Touch menu, and press
Using the Interactive Features
Enter.
212