Vidonn F1 User Manual

Home：
VIDONN F1
Wireless bone conduction sport headphone
User guide
Settings：

1. Charge

Charge the headphones with the included MicroUSB charging cable. The LED indicator will
turn blue from red when charging is complete.

2. Pair

While off, press and hold the power button for 5 seconds to enter pairing mode, the LED
indicator will flash blue and red repeatedly while in discovery.

3. Connect

In pairing mode, enable the Bluetooth settings in your device and select "Vidonn F1",
VidonnF1 will be connected with in seconds and there is a voice prompt by the word
"connected".

Multifunction Button

Function
Play/pause music
Skip to next song
Answer/end call
Reject a call
Low power alert
（Less than 30%）
Restore to factory settings
Volume Up/Power Button(B) Volume Down Button(C)
Function
Power on/ff
Turn up the volume
Vidonn F1 Manual
Action
Click once
Double-click while music is
playing
Click once
Press and hold for 3 seconds
Press and hold both volume
down button and
multifunction button
Action
Press and hold power button
for 3 seconds
Click the volume up button to
adjust volume
Prompt voice
None
None
One beep
One beep
Battery low
Two beeps
Prompt voice
Power on/Power off
There is one beep if reach
maximum