8 speed gear-head drill press: user guide (44 pages)
Summary of Contents for Grizzly G0490X
Page 1
MANUAL INSERT The Model G0490X is the same as the Model G0490, except it has a spiral cutterhead. Besides the data sheet and parts in this insert, the content in the Model G0490 owner's manual is the same for both machines.
Page 4
P0490045 BALL HANDLE P0490046 STUD P0490047 FENCE P0490048 SCALE P0490049 RIVET P0490050 TABLE RH Model G0490X REF PART # DESCRIPTION P0490051 TABLE SHAFT P0490052 EXTENSION TABLE PSB02M CAP SCREW M6-1 X 20 P0490054 CHIP DEFLECTOR PSB26M CAP SCREW M6-1 X 12 PSB148M CAP SCREW M8-1.25 X 80...
Page 5
TAP SCREW M4 X 8 P0490134 SWITCH BRACKET PFS02M FLANGE SCREW M6-1 X 12 PSB64M CAP SCREW M10-1.5 X 25 PLW06M LOCK WASHER 10MM PW04M FLAT WASHER 10MM P0490142 POWER CORD P0490143 MOTOR CORD P0490144 CONTROL PANEL CORD Model G0490X...
Page 8
MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine again. Contact Grizzly at (800) 523-4777 or www.grizzly.com to order new labels. REF PART #...
Page 9
The buttons with bulbs start and stop the machine as intended, and they will not hinder the perfor- mance of your machine in any way. Sincerely, The Grizzly Quality Control Team Dear Valued Customer, Your new Model G0490 8" Jointer may or may not have switch buttons with light bulbs inside. If...
Improvements to this machine were made since the manual was originally printed. This update covers those changes. Keep this update with your Owner's Manual in case you ever need to refer to it. If you have ques- tions, contact Tech Support at (570) 546-9663 or by email at techsupport@grizzly.com. Improved Shipping Setup The motor is now securely bolted to the inside of the stand for shipping purposes.
Improvements to this machine were made since the manual was originally printed, and this update covers those changes. Keep this update with your owner's manual in case you ever need to refer to it. If you have questions, contact Tech Support at (570) 546-9663 or by email at techsupport@grizzly.com. Lighted Controls We added lights in the control panel buttons to indicate when there is power to the machine.
Need help?
Do you have a question about the G0490X and is the answer not in the manual?
Questions and answers