Konica Minolta bizhub 4702P User Manual page 108

Understanding the printer menus
Wireless
Note: This menu is available only in printers connected to a wireless network.
Menu item
Setup On Printer Panel
Choose Network
Add Wi-Fi Network
Network Name
Network Mode
Infrastructure*
Ad hoc
Wireless Security Mode
Disabled*
WEP
WPA2/WPA - Personal
WPA2 - Personal
Wi‑Fi Protected Setup
Start Push Button Method
Start PIN Method
Network Mode
BSS Type
Infrastructure*
Ad hoc
Preferred Channel Number
Auto*
1–11
Enable Wi‑Fi Direct
On
Off*
Compatibility
802.11b/g/n (2.4GHz)*
802.11a/b/g/n/ac (2.4GHz/5GHz)
802.11a/n/ac (5GHz)
Wireless Security Mode
Disabled*
WEP
WPA2/WPA - Personal
WPA2 - Personal
802.1x - RADIUS
Description
Configure the wireless connection using the control panel.
Establish a wireless network and enable network security.
Notes:
•
Start Push-Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given period of time.
•
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings
of the access point.
Specify the network mode.
Note: Preferred Channel Number only appears if BSS Type is set to
Ad hoc.
Set the printer to connect directly to Wi-Fi devices.
Specify the wireless standard for the wireless network.
Note: 802.11a/b/g/n and 802.11a/n are selectable only if the Enable
Wi‑Fi Direct setting is disabled.
Set the type of security for connecting the printer to wireless devices.
108