How To Use This Manual - Kenwood C-707i-S Instruction Manual

How to Use This Manual

Operation procedure
While this system can be
controlled from either the
remote control or the main unit,
the explanations in this manual
primarily describe operation
procedures using the remote
control.
Remote control keys used
in the procedure
Display shown during or
after an operation
The displays shown in this
instruction manual may diff er from
the actual displays.
6
C-707I
en01_c-707i.indd 6 en01_c-707i.indd 6
CD
This section explains how to play a CD. In addition to commercially available music CDs, you also can play
discs with MP3 and WMA audio files recorded on them. For details, see <Supported Media> (page 24).
Playing a CD
Load and play the CD.
If a disc is already loaded, simply press the [CDE] key to turn the system on and
begin playback.
1
Open the slide door and load the CD.
Slide door
2
Slide the slide door towards the front panel to close it.
The CD will not play unless the slide door is closed.
3
Press the [CDE] key.
Indicates CD is loaded.
Source
Playback indicator
Track numbers may not display correctly while following types of discs are playing.
– Discs recorded in Mix mode *
– Discs recorded in multiple sessions
– Discs recorded in mixed formats of CD-DA format and non-music data formats
* Mix mode combines the CD-DA format with audio files, such as MP3 and WMA.
30
C-707I
Center the CD with the inlet
slot with the label side facing
towards the front of the main
unit.
After you inset the CD
part way, it will be pulled
automatically the rest of the
Label
way in.
surface
Track number
Elapsed time of
current track
12/27/2007 4:29:07 PM 12/27/2007 4:29:07 PM