Advertisement
Massage Motors
2,
Massage motor
4,
Elevation motor
1, Tapping motor
This motor rotates to move the massage balls upward and downward alternately via
the driving belt coupled to the motor.
(The motor revolutions is adjustable in three steps so that the tapping frequency
can be changed over to approximately 300,390,480,540 and 600 cycles/minute.)
2, Massage motor
This motor rotates to move the massage balls crosswise via the driving belt and gear
box coupled to the motor.
(The motor revolutions is adjustable in three steps so that the massaging frequency
can be changed over to approximately 10,15,20,25 and 30 cycles/minute.)
(When tapping, shiatu and stretching the backbone line, the massage ball position
can be changed over in three steps after starting the massagemotor.)
(Massage ball width approximately 70,85,100,115 and 130 mm.)
3, Strength motor
This motor rotates to transmit its rotating torque to the shaft screw via the driving
belt, whereby the massage unit is moved forward, and backward and the massage
balls is moved forward and backward.
(This motor rotates clockwise and counterclockwise to thereby move the massage
unit forward and backward.)
(When tapping, massage, shiatu and stretching the backbone line, the massage unit
position can be changed over in five steps after starting the strength motor.)
4, Elevation motor
This motor rotates to transmit its rotating torque to the gear of right and left of a
massage unit the driving belt.
The gear is included in right and left of a back frame. It has geared with the gear of
right and left of a massage unit.
This motor rotates, a gear on either side rotates and a massage unit moves up and
down in the gear top of a back frame.
(This motor rotates, clockwise and counterclockwise to thereby move the massage
unit move up and down.)
(When stretching the backbone line, the massage ball is moved up and down.)
2
1
3
4
- 8 -
HEC-DR5000
2
3
4
(GENERAL)
3,
Strength motor
1,
Tapping motor
Advertisement
