Advertisement
FAQ/If a problem occurs ...
Resetting the headphones
If the function of the headphones is disturbed, perform a reset. Indi-
vidual settings such as the pairing settings are not deleted.
▷
Press the multi-function button for 20 seconds.
You hear a short confirmation sound.
Deleting the Bluetooth pairing list of the headphones
You can delete the Bluetooth pairing list using the Smart Control app.
Follow the instructions in the app.
Resetting the headphones to the factory default settings
To be able to reset the headphones to the factory default settings,
you require the Smart Control app (> 19).
▷
Switch on the headphones (> 19) and connect them to a Bluetooth
device on which the Smart Control app is available.
▷
Select the "Factory default settings" function in the app settings.
▷
Follow the instructions in the app.
R
20s
MOMENTUM 4 | 41
Advertisement
Need help?
Do you have a question about the MOMENTUM 4 and is the answer not in the manual?
Questions and answers
Hello - when using the momentum 4 headphones with a 3.5mm cable and powered on to utilise the ANC, does the internal DAC still operate or will it be deactivated therefore allowing for the benefit of an external DAC to be used to improve the sound?
Yes, when the Sennheiser MOMENTUM 4 headphones are used with a 3.5mm cable and ANC is powered on, the internal DAC is likely operating to process the sound, as ANC and other powered features require the internal electronics to function.
This answer is automatically generated
Не работает кнопка включения
The Sennheiser MOMENTUM 4 power button may not be working due to a possible malfunction after a loud pop sound was heard, which caused the headphones to stop playing. The issue may be related to a battery or internal hardware failure, as the user reported the device had a 30% charge when it stopped working and later did not turn on despite holding the button for several seconds. If the device does not respond, a reset or contacting support may be necessary.
This answer is automatically generated