Advertisement

Quick Links

TR2350ACT
OWNER'S MANUAL
TERMS OF USE
INSTALLER TERMS OF USE
Automotive Data Solutions Inc. ("ADS") products are strictly intended for installation by Certified Technicians
who are employed by a registered business specialized in the installation of automotive aftermarket electronics
products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician's
responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in
Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential
damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of
economic opportunity and the like that may or may not have resulted from the use, misuse, improper
installation or operation of its products. Purchasers sole contractual remedy is refund of the purchase price of
the ADS product(s). ADS reserves itself the right to suspend any Weblink® account without notice and decline
to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.
END USER TERMS OF USE
ADS products are designed to remote start vehicles from a distance. In order to ensure your iDatastart system
meets all safety regulations and operates as intended by the manufacturer, please follow the usage
recommendations below:
• DO NOT use this product for any purpose other than its intended usage.
• DO NOT remote start a vehicle in an indoor or enclosed area (i.e. garage). Exhaust fumes are extremely
dangerous and can cause personal injury or death. Install carbon monoxide detectors in every living area that
can be exposed to vehicle exhaust fumes.
• DO NOT remote start a vehicle while it is being serviced. Follow the Valet Mode procedure as outlined in your
Owner's Manual.
• DO NOT remote start a vehicle in gear.
• DO NOT remote start a vehicle with the key in the ignition.
• DO NOT remote start a vehicle left unattended with open windows, unlocked doors or open convertible top.
• DO NOT allow children handle or operate long range remotes.
• ALWAYS engage your emergency brake prior to exiting your vehicle. This may limit motion if the vehicle is
accidentally started in gear.
• AVOID remote starting your vehicle while passengers or pets are on board. This may increase the risk of
2022-03-23 © Automotive Data Solutions Inc. 1/16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TR2350ACT and is the answer not in the manual?

Questions and answers

Summary of Contents for Automotive Data Solutions TR2350ACT

  • Page 1 TERMS OF USE INSTALLER TERMS OF USE Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in...
  • Page 2: Remote Overview

    FM 2-WAY Max. Range 3000 feet Buttons Transmit Con rmation (TX) Top LED Receive Con rmation (RX) Button LED + Chime Batteries Required 1 x CR2450 Avg. Battery Life 6-12 months Warranty 1 year 2022-03-23 © Automotive Data Solutions Inc. 2/16...
  • Page 3 Unlock & Disarm BUTTON Accesses your vehicle by unlocking the doors and DESCRIPTION disarming the alarm. CONFIRMATION 2 chimes + 2 flashes COMMAND Query* BUTTON DESCRIPTION Queries vehicle and vehicle battery voltage and interior temperature. 2022-03-23 © Automotive Data Solutions Inc. 3/16...
  • Page 4 Starts and stops the engine. 4 chimes + 4 flashes (Button LEDs will also flash CONFIRMATION intermittently while engine is running) COMMAND AUX 1 BUTTON DESCRIPTION To be completed by Authorized Dealer if applicable 2022-03-23 © Automotive Data Solutions Inc. 4/16...
  • Page 5 2nd Car Mode BUTTON Controls two iDatastart-equipped vehicles using one DESCRIPTION remote. Works with all functions marked with an asterisk (*). COMMAND Silent Lock* BUTTON DESCRIPTION Disables the vehicle’s horn and alarm siren. 2022-03-23 © Automotive Data Solutions Inc. 5/16...
  • Page 6 COMMAND Mute ON/OFF BUTTON Disables the vehicle’s horn and alarm siren even DESCRIPTION when alarm is triggered. Remote will still receive alarm notification. •1 chime ON CONFIRMATION •2 chimes OFF 2022-03-23 © Automotive Data Solutions Inc. 6/16...
  • Page 7 Weather Start ON/OFF BUTTON Sets your vehicle to automatically remote start every DESCRIPTION 2, 3 or 4 hours (programmable) or from a temperature sensor sold separately. •1 chime ON CONFIRMATION •2 chimes OFF 2022-03-23 © Automotive Data Solutions Inc. 7/16...
  • Page 8: Programming A New Remote

    2. All new remotes must be installed by an iDatastart Authorized Dealer. 3. A maximum of 4 remotes can be programmed to your iDatastart system. REPLACING REMOTE BATTERIES Follow the steps below to replace the batteries in your iDatastart remotes*. 2022-03-23 © Automotive Data Solutions Inc. 8/16...
  • Page 9 NOTE: This feature may not be supported on some vehicles. If supported, the chosen button sequence will be communicated to you by your iDatastart Authorized Dealer at the time of installation. The remote start range will be equal to your factory key fob’s door lock range. 2022-03-23 © Automotive Data Solutions Inc. 9/16...
  • Page 10: Adjusting Engine Runtime Settings

    To ensure safety during vehicle servicing, the remote starter must be placed in ‘Valet Mode’. The ‘Valet Mode’ will disable remote start functionality. To activate or deactivate the ‘Valet Mode’, follow the instructions below: With Vehicle Key: Cycle ignition OFF/ON 2x rapidly, then press brake 3x. 2022-03-23 Automotive Data Solutions Inc. 10/16...
  • Page 11: Remote Start Troubleshooting

    Valet Mode OFF REMOTE START TROUBLESHOOTING If your iDatastart remote fails to start the vehicle, the parking lights will flash three times immediately, then flash a number of times according to the errors below: 2022-03-23 © Automotive Data Solutions Inc. 11/16...
  • Page 12: Vehicle Shutdown Troubleshooting

    If the remote start sequence has been completed and the vehicle shuts down, the vehicle’s parking lights will flash 4 times immediately, then flash a number of times according to the errors below: 2022-03-23 © Automotive Data Solutions Inc. 12/16...
  • Page 13: Limited Lifetime Warranty

    Module overheat protection Contact Authorized Dealer LIMITED LIFETIME WARRANTY Automotive Data Solutions Inc. (“ADS”) warrants to the original purchaser of the iDatastart product that the following components product shall be free of defects in material and workmanship under normal use and circumstances: Control module and installation harnesses For as long as the original purchaser owns the vehicle in which it was originally installed.
  • Page 14: Fcc Statement

    • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. IC STATEMENT 2022-03-23 © Automotive Data Solutions Inc. 14/16...
  • Page 15 économique Canada. Le fonctionnement est soumis auxdeux conditions suivantes : (1) Cet appareil ne doit pas causer d'interférences. (2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles deprovoquer un fonctionnement indésirable de l'appareil. 2022-03-23 © Automotive Data Solutions Inc. 15/16...
  • Page 16 This device complies with FCC and ISED 10-g extremity SAR requirements when the device is used at 0 mm separation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2022-03-23 © Automotive Data Solutions Inc. 16/16...

Table of Contents