Table of Contents
Advertisement
(3) Start up the Intel® WiDi software with the computer.
(4) Operate the Intel® WiDi software to select "SB06WC"
(name of the product when shipped from the factory)
and then click [Connect].
NOTE:
• For Windows 8.1, open the Charm bar and click "SB06WC"
after selecting [Device] followed by [Project].
• Depending on the operating environment, the product
"SB06WC" may not be detected. In that case, click [Scan (S)]
to scan again.
(5) When connecting the product to a computer for the first time, the security code will be displayed in
the standby screen on the display end. Enter this security code in the Intel® WiDi software and click
[Continue].
(6) At the end of the connection processing, the display screen of the computer will appear in the display.
(7) Click [Disconnect] in the Intel® WiDi software to stop the connection with the Intel® WiDi software.
How to adjust the size of the computer image displayed in the display/projector
When black edges appear around the screen without the computer display screen appearing correctly
in the screen of the display/projector, the size of the image can be adjusted using the following method.
(1) Select [Settings]-[Image and Sound (P)] in the Intel® WiDi software.
(2) Click [Adjust cropping] in the [Settings - Picture and Sound] screen.
(3) Click the [+]/[-] icons in the [Setting - Adjust Edge Display] screen to adjust the image size.
English-18
Advertisement
Table of Contents
