Panasonic CF-30KTPAXJM Operating Instructions Manual page 24

Troubleshooting (Basic)
Starting Up
[Executing Battery Recali-
bration] screen appears.
[Enter Password] does not
appear when resuming from
sleep (
standby (
hibernation.
Cannot resume.
Other startup problems.
Entering Password
On the [Enter Password]
screen, the password cannot
be entered.
Even after entering the
password (
Locked (
your password is displayed
again.
Shutting down
Windows does not shut
down.
24
The Battery Recalibration was canceled before Windows was shut down last time. To
start up Windows, turn off the computer by the power switch, and then turn on.
The password you have set in the Setup Utility is not requested at resuming. To use the
password security at resuming, set the Windows password.
)/
(Start) - [Control Panel] - [Add or remove user accounts] and select the ac-
A Click
)/
count, and set the password.
B Click (Start) - [Control Panel] - [System and Maintenance] - [Require a password
when the computer wakes] and add a check mark for [Require a password].
A Click [start] - [Control Panel] - [User Accounts] and select the account, and set the
password.
B Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] -
[Advanced] and add a check mark for [Prompt for password when computer resumes
from standby].
An error may occur when the computer automatically enters the sleep or hibernation
mode while the screensaver is active. In this case, turn off the screensaver or change
the pattern of the screensaver.
F9 in the Setup Utility (
Press
Setup Utility settings (excluding the passwords) to the default values. Start the Setup
Utility and make the settings again.
Remove all peripheral devices.
Check to see if there was a disk error.
A Remove all peripheral devices including an external display.
(Start) - [Computer] and right-click [Local Disk (C:)], and click [Properties].
B Click
C Click [Tools] - [Check Now...].
A standard user needs to enter an administrator password.
D Select the option in [Check disk options] and click [Start].
E Click [Schedule disk check] and restart the computer.
A Click [start] - [My Computer] and right-click [Local Disk(C:)], and click [Properties].
B Click [Tools] - [Check Now].
C Select the option in [Check disk options] and click [Start].
Start the computer in Safe Mode and check the error details. When the [Panasonic] boot
screen disappears
Menu is displayed.
*1
When [Password on boot] is set to [Enabled] in the [Security] menu of the Setup Utility,
[Enter Password] appears after the [Panasonic] boot screen disappears. As soon as you
enter the password and press
The computer may be in ten-key mode.
If the NumLk indicator
input.
The computer may be in ten-key mode.
If the NumLk indicator
)/
input.
)/Type
The computer may be in Caps Lock mode.
If the Caps Lock indicator
mode, and then input.
Remove the USB device and the ExpressCard.
Wait 1 or 2 minutes. It is not a malfunction.
Reference Manual "Setup Utility") to return the
*1
at startup, press and hold
Enter , press and hold F8 .
NumLk to disable the ten-key mode, and then
lights, press
NumLk to disable the ten-key mode, and then
lights, press
Caps Lock to disable the Caps Lock
lights, press
F8 until the Windows Advanced Options