Contents 1 Important 2 Your Bluetooth speaker Introduction What's in the box Overview of the speaker 3 Get started Power supply Turn on 4 Use Bluetooth devices Play from Bluetooth devices Control your phone call 5 Other features Listen to an external device Adjust volume 6 Product information Specifications...
1 Important Warning • Never remove the casing of this speaker. • Never lubricate any part of this speaker. • Never place this speaker on other electrical equipment. • Keep this speaker away from direct sunlight, naked flames or heat. • Make sure that there is enough free space around the speaker for ventilation.
2 Your Bluetooth speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this speaker, you can enjoy audio from your Bluetooth-enabled devices, or other external audio devices. What's in the box...
Overview of the speaker /PAIRING • Enter Bluetooth pairing mode. • Turn the speaker on or off. • Disconnect Bluetooth connection. b +/- • Answer or reject an incoming call. • Adjust volume. • End the current phone call.
Page 7
d Battery compartment e AUDIO IN • Connect an external audio device. f DC IN • Connect power.
3 Get started Option 2: AC power Caution • Always follow the instructions in this chapter in Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back sequence. or underside of the speaker. Connect the power adaptor to: Power supply the DC IN socket on the speaker.
Page 9
Turn off The speaker is turned off in the following situations: • Press and hold for 2 seconds again; • The Bluetooth connection is disconnected and there is no audio-in cable inserted for 15 minutes. » The LED indicator is turned off.
During a call, press to end the current that can be paired (refer to the user call. manual of the device). When [PHILIPS BT3010] is displayed on your device, select it to start pairing and connection. If necessary, input “0000” as the pairing password.
5 Other features Adjust volume During play, press + or - repeatedly to increase or decrease the volume level. Listen to an external device • To increase or decrease volume continuously, press and With this speaker, you can also listen to an hold + or - for 2 seconds.
HFP, A2DP, AVRCP Range 10 m (Free space) General information Power Supply - AC Power Power adapter A: (power adapter) Brand name: PHILIPS; Model: AS100-050- AE150; Input: 100-240 V~, 50/60 Hz, 0.5 A Output: 5 V 1.5 A; Power adapter B: Brand name: PHILIPS;...
If the problem remains • For some devices, Bluetooth connection unsolved, go to the Philips Web page (www. may be deactivated automatically as a philips.com/support). When you contact Philips, power-saving feature. This does not indicate make sure that the device is nearby and the any malfunction of this product.
You can find the The Bluetooth word mark and logos are Declaration of Conformity on www.philips.com/ registered trademarks owned by Bluetooth support. SIG, Inc. and any use of such marks by Gibson is under license.
Page 16
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.