Table of Contents
Advertisement
Useful apps
Starting Smart Remote
1
Tap Smart Remote on the All apps screen.
2
Tap Select country or region and select a country, region, and broadcast service.
3
Tap Personalise, tick your favourite genres and sports, and then tap Next.
4
Tap Age or Gender to set your profile, and then tap Done.
5
Tap → Continue.
6
Select the TV brand.
To connect the device to a projector and use the device as a remote control, tap I have a
projector.
7
Ensure that the device's infrared port is facing the TV and tap TV. Then, tap Yes, this code
1 works if the device turns on the TV.
If the device does not turn on the TV, tap Send this code 1 again or No, test next code 2,
and then repeat this until the TV recognises the signal.
8
Select a channel source.
Using the device as a remote control
You can turn the TV on or off, browse channels, or adjust the volume level on the TV using the
device as a remote control.
1
Tap Smart Remote on the All apps screen.
2
Select a category at the top of the screen.
3
Face the device's infrared port to the TV, select a TV programme, and then tap WATCH ON
TV.
The selected programme will be shown on the connected TV.
138
Advertisement
Table of Contents
