Table of Contents
Advertisement
4.
Select Yes. The TV automatically turns off and then on again to set the selected HDMI connector
to
HDMI UHD
Color.
"
Before selecting
TV. The
HDMI UHD Color
HDMI connector.
5.
When the settings are complete, a confirmation message appears. Select OK.
6.
Connect the TV to the external UHD player using the HDMI cable, and then turn on the external
UHD player.
"
After setting the HDMI connector to On, it takes some time to complete the conversion.
"
If the HDMI connector with
UHD content, the device may not operate properly. If this is the case, set
connector to Off.
"
The HDMI connector with
HDMI connector with
more information, refer to "Supported Resolutions for UHD".
●
Film Mode
Try Now
Optimizes the picture quality for movies. Select this mode for watching movies.
"
This feature is only available when you are watching a TV broadcast or when the input signal is AV,
Component (480i, 1080i), or HDMI (1080i).
●
Auto Motion Plus
Removes blurring and judder from scenes with rapid movement. If you select Custom, you can
configure Blur Reduction and Judder Reduction manually and set
sharper LED image.
"
If you have
Auto Motion Plus
resolution and frequency of the incoming video signal (60Hz). This frequency is not the same as the
frequency of the picture the TV is displaying when
"
If
LED Clear Motion
"
When
LED Clear Motion
●
Smart LED
Controls the brightness of individual areas on the screen to maximize contrast automatically.
Smart LED is not supported in all regions and is not supported in all the TV's modes.
●
Cinema Black
Try Now
In Movie mode, this feature dims the upper and lower zones of the video image to provide a more
immersive viewing experience.
Yes
from the popup window, make sure that the HDMI cable is not connected to the
settings will be completed only if the HDMI cable is not connected to the
HDMI UHD Color
HDMI UHD Color
HDMI UHD Color
Try Now
on, and then bring up the
is
On
at 60Hz video signal, the screen may flicker.
is set to On, the screen is darker than usual.
enabled is connected to a device that does not support
set to
Off
supports up to UHD 50P/60P 4:2:0, while the
set to
On
supports up to UHD 50P/60P 4:4:4 and 4:2:2. For
INFO
Auto Motion Plus
HDMI UHD Color
LED Clear Motion
screen, the
INFO
screen displays the
is on.
for the HDMI
on for a
Advertisement
Table of Contents
Troubleshooting
