Table of Contents
Advertisement
3.
Use a type B-to-type A USB cable as shown. Connect type B connector of this cable to the
USB 3.0 upstream connector on the monitor. Then, connect type A connector of the cable
to a USB connector on the computer. To locate the USB 3.0 upstream connector on the
monitor, see
"Locating connectors and controls on your monitor"on page 1-3.
4.
Connect one end of the USB cable to the USB downstream terminal on the side of the
monitor, and connect the other end of the USB cable to an appropriate USB port on your
device.
Note: The USB downstream port does not provide power while the monitor switch is off.
*: Depending on many factors such as the processing capability of peripheral devices, file
attributes, and other factors related to system configuration and operating environments, the
actual transfer rate using the various USB connectors on this device will vary and is typically
slower than the data rates as defined by the respective USB specifications: - 5 Gbit/s for USB
3.1 Gen 1; 10 Gbit/s for USB 3.1 Gen 2 & 20 Gbit/s for USB 3.2.
1-9
Chapter 1.
Advertisement
Table of Contents
