Advertisement
Advertisement
Table of Contents
Related Manuals for Gigafast EZ800-S
Summary of Contents for Gigafast EZ800-S
- Page 1 EZ-800S Mini 8 Port Switch User Manual...
- Page 2 Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only. Specifications are subject to be changed without prior notice. Copyright© 2004, GigaFast Inc., All Right Reserved...
-
Page 3: Ce Declaration Of Conformity
FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a commercial environment. - Page 4 Table of Content: Chapter 1 Introduction Features Package Content Wire Diagram Chapter 2 Quick Install Chapter 3 Frequently Asked Questions (FAQ) Appendix A Spec. Sheet...
- Page 5 LAN party or expand your existing home/business network so you can have more computers linked together. Please read farther down for more information on this great unit and thank you for choosing GigaFast. Features: •...
- Page 6 Five RJ-45 por ts on the rear panel, reducing desktop cable clutter • Auto-Uplink function simplifies network extension and allows the and allows the switch to connect to another switch or hub using a straigh through cable • Plastic housing with •...
- Page 7 Wire Diagram:...
- Page 8 Sample Picture of the EZ-800s Front Back *Note* Products, manual, information may be changed without notification. lease view our website for further changes and information. ww.gigafast.com...
-
Page 9: Quick Install
5. Insert the power pack into the power outlet. 6. Connect the cable attached to the power pack adapter to the power inlet on the rear panel of the switch. *Note* If you’re trying to expand yo 00s into a router, simply have an Ethernet cable connected in between of e EZ-800s and the router you have. - Page 10 -Mail: techsupp@gigafast.com Website: www.gigafast.com Thank you for choosing GigaFast Chapter 3 Frequently Asked Questions (FAQ): Q: What is the dimension on the EZ-800s? A: L: 155mm x W: 95mm x H: 25mm Q: What is the operating temperature on the...
- Page 11 ‘specify an IP addresses’ and insert the dedicated IP address. Specify the Mask address and click on ‘apply’ 4. Please ensure that you do a ping test to make sure the switch is communicating with your ISP/co r MAC based Operating System) Under ‘Sy...
- Page 12 3. Static IP addresses weren’t set on the computers that is within the : I have set up my switch with static IP’s and all the lights seem to be okay, but I can’t do file sharing with my computers that are plugged into the EZ-800s A: Make sure you have same ‘Work Group’...
- Page 13 2. You should then see several tabs on one dialog. One of those tabs will allow you to change the workgroup name on that particular computer 3. Be certain that all the computers have the same workgroup name : Does the EZ-800s have the ‘auto uplink’ ability? If so, which port? : Our EZ-800s all have auto uplink and any port supports it.
- Page 14 : Put the EZ-800s somewhere that has more air flow and see if that solves the roblem. If not, then the switch might be defective. If that is the case, please call ur tech support line or e-mail us for further assistance.
- Page 15 Buffer Memory Flow control Duplex mode Power Supply Dimensions Temperature Humidity Housing Warranty Switch Specifications Shee IEEE802.3 10Base-T Ethernet IEEE 802.3u & 802.3x 100 Base-TX Fas Ethernet Eight 10BASE-T / 100BASE-TX N-Way ports Ethernet: 10Mbps (half duplex) 20Mbps (full duplex)
Need help?
Do you have a question about the EZ800-S and is the answer not in the manual?
Questions and answers