Do not abuse the cord. Never use the cord for representative in Europe who is: carrying, pulling or unplugging the power tool. Makita International Europe Ltd. Keep cord away from heat, oil, sharp edges or Michigan Drive, Tongwell, moving parts. Damaged or entangled cords Milton Keynes, Bucks MK15 8JD, England increase the risk of electric shock.
Page 4
rate for which it was designed. tool is maintained. 18. Do not use the power tool if the switch does 29. Follow instruction lubricating not turn it on and off. Any power tool that cannot changing accessories. be controlled with the switch is dangerous and 30.
Page 5
14. Do not tamper with the tool or attempt to use it Do not expose battery cartridge to water for other than driving fasteners. or rain. 15. Do not operate the tool without fasteners. It A battery short can cause a large current flow, shortens the service life of the tool.
NOTE: FUNCTIONAL DESCRIPTION There is a possibility that the tool may operate for • an instant when only the trigger is pulled. This does CAUTION: not indicate a problem. If this occurs, point the tool Always be sure that the tool is switched off and the •...
Hook 1. Staples 2. Main magazine CAUTION: Always make sure that your fingers are not placed • on the trigger or the lever and the battery cartridge is removed before using the hook. 1. Groove 2. Hook 3. Screw 009153 To secure the sub magazine in place, hook the locking lever on the rear of the sub-magazine.
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding 009161 these accessories, ask your local Makita Service Center. CAUTION: Staples • Do not operate the tool without staples. It shortens •...
Page 9
NOTE: Some items in the list may be included in the tool • package as standard accessories. They may differ from country to country.
Page 12
Makita Corporation Anjo, Aichi, Japan www.makita.com 884841D226...