Table of Contents
Advertisement
Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2002 Award Software
ACPI Suspend Type
Power LED in S1 state
Soft-Off by PWR-BTTN
PME Event Wake Up
ModemRingOn/WakeOnLan
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
Power On by Mouse
Power On by Keyboard
x KB Power ON Password
AC Back Function
: Move
Enter: Select
F3: Language
F5: Previous Values
ACPI Suspend Type
S1(POS)
Set ACPI suspend type to S1. (Default Value)
S3(STR)
Set ACPI suspend type to S3.
Power LED in S1 state
Blinking
In standby mode(S1), power LED will blink. (Default Value)
Dual/OFF
In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Power Management Setup
[S1(POS)]
[Blinking]
[Instant-off]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
Enter
[Soft-Off]
+/-/PU/PD: Value
F10: Save ESC: Exit
F6: Fail-Safe Defaults
Figure 5: Power Management Setup
- 41 -
Item Help
Menu Level
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
F1: General Help
F7: Optimized Defaults
BIOS Setup
Advertisement
Table of Contents
