Table of Contents
Advertisement
RANGE HOOD CARE
Cleaning
WARNING
To Reduce The Risk Of Fire Or Electrical shock
disconnect from power supply before cleaning.
IMPORTANT
according to the following instructions. Replace
IMPORTANT
Cooktop Polishing Creme, steel wool, gritty washcloths
or paper towels.
To avoid damage to the stainless steel, do not use
cleaners that contain chlorine.
Cleaning Method:
Use warm water with liquid detergent or all purpose
•
cleaner and soft cloth to clean outside surfaces.
•
Rinse with clean water and dry with soft, lint-free cloth.
•
•
avoid scratching or damaging the surface.
NOTE:
stainless steel brush to avoid scratching or damaging
the surface.
1.
phillips screwdriver
2.
A
3.
14
A. Filter screw
4.
retainer.
5.
a mild detergent. Rinse well
and shake to dry. Or place
in upper rack of dishwasher
to clean.
NOTE: Do not use ammo-
darken.
NOTE: You can use either dishwasher or hot detergent
solution and rinse in clean water.
NOTE
cleaning
Replacing the Incandescent LightBulb
1.
Turn off the range hood and allow the light bulb to cool.
2.
3.
Squeeze the plastic lens cover and remove it from the hood.
4.
Screw a
incandescent light bulb
into socket.
5.
Replace lens cover by
squeezing cover and
inserting tabs into
slots.
6.
Reconnect power.
If new light does not operate, make sure the lamp is
inserted correctly before calling service.
B
A
Charcoal / Grease Filter Accesory Kit
available. You can order this as part number 5304486302.
months with normal use.
A
A. Filter screw
A. Light bulb socket
B. Lens cover
Advertisement
Table of Contents
