Control Panel - Samsung D151W User Manual

setting up your dishwasher

ConTroL PAnEL

pOWeR
1
pROGRAm
2
SeleCTOR
dISplAy
3
delAy START
4
4 in 1
5
STeRIlIZATION
6
1/2
7
14_ setting up your dishwasher
UserManual-DMS400TH_EN.indd 14
5 1
When pressed, all indicator lights turn on and off and the most recently
finished program light is lit.
When the dishwasher is running and a selected program has finished, 'En' is
displayed and the power turns off automatically.
You can select the appropriate wash program depending on the soil level of
your dishes. When a program is selected, the indicator for that program lights
up.
Displays the remaining wash time, the wash information (Delay start, Salt refill,
Rinse refill, Child lock), and error messages.
If an error occurs during an operation, an error message is displayed with a
warning sound. Refer to the information on page 30.
Use the delay Start button to preset the start time. The indicator changes
each time the button is pressed. The delay start time can be adjusted from 1
hour to 24 hours.
If you want to use multi-functional detergent such as "2 in 1", "3 in 1", and
"4 in 1" detergent, select a program and then press this button. (The 4 in 1
function is only available when selecting the Normal, Eco, Pots&Pans, Crystal
and Quick programs.)
Though the "Rinse Refill" indicator is lit while the 4 in 1 function is activated,
you do not have to add rinse detergent to the rinse aid dispenser.
Press this button to use the sterilization function by increasing the heat by 80
degrees during the final rinse cycle.
This function is only available when selecting the Normal, Pots&Pans, Eco, or
Rinse Dry courses or the 4 in 1 function.
For small loads, only use the top or bottom basket to save energy. Pressing
the button cycles between selecting the top or bottom basket.
2
1/27/2012 5:10:03 PM