Advertisement
8
Press the sides of the protective piece, and then lift and remove it.
9
Remove the protective film from the control panel.
Note:
The touchscreen will not operate if you do not remove the
protective film.
10
Remove the tape and the protective piece.
11
Close the front cover.
12
Open the cut sheet cover and remove the tape inside the printer.
13
Open and fold back the roll paper cover.
14
Remove the tape and the protective pieces.
15
Close the roll paper cover and the cut sheet cover.
16
Dispose of all the tape and the protective pieces.
Install Ink Cartridges
Note:
•
The printer is designed for use with Epson
only, not third-party cartridges or ink.
•
The cartridges included with the printer are designed for printer setup and not for
resale. After some ink is used for initializing, the rest is available for printing.
1
Connect the power cord to the printer. Route the cord through the
hooks on the back of the printer and plug the other end of the power
cord into an outlet.
2
Press the
power button on the control panel to turn on the printer.
Raise the control panel if necessary.
3
Select your language on the LCD screen.
4
When you see a message about removing protective parts, select Done.
5
Select the date and time.
Note:
Select See Guide to view additional instructions.
6
Follow the prompts to begin ink initialization.
7
Open the front cover.
8
Pull and lift the tab on the ink cartridge cover to open the cover.
Remove the protective paper covering the ink ports.
cartridges
®
Advertisement
