Simple Steps To Start - Samsung DVG50M7450P/A3-00 User Manual

Operations
05 Digital Graphic
Display
06 Eco Dry
07 Adjust Time
08 Wrinkle Prevent
09 POWER
10 START/PAUSE
NOTE
Extremely tangled items finished by the washer may degrade the drying efficiency or
cause the door to open. We recommend that you untangle the items before drying.

Simple steps to start

1. Press POWER to turn on the dryer.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings (Dry Level
and Time) as necessary.
4. Optionally, you can activate options
available by pressing the relevant
button (Eco Dry and/or Wrinkle
Prevent).
5. Press START/PAUSE. The dryer indicator
turns on with an estimated cycle time
on the display.
32 English
DV7450M-03170Z-02_EN.indd 32
Displays all cycle information, including the cycle time,
information code, and operating status.
This function is available with NORMAL and TIME DRY.
With the Eco Dry activated, drying takes a longer time but the
power consumption is reduced.
The drying time can be extended by up to 3 times depending on
the temperature and load. The Eco Dry function is enabled by
default.
You can change the set time in the Manual Dry cycles (TIME DRY,
QUICK DRY) and WRINKLE AWAY. To change the cycle time, press
or until the desired time is displayed.
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry, and can be removed at any time during the
Wrinkle Prevent cycle.
Press to turn on/turn off the dryer.
Press to start or stop operation.
To change the cycle during operation
1. Press START/PAUSE to stop operation.
2. Select a different cycle.
3. Press START/PAUSE again to start the
new cycle.
3/31/2017 12:49:37 PM