Panasonic FZN1C Operating Instructions Manual page 53

RM151_Rugged USB Dock_OI_Draft1.0
Operating Instructions
Rugged USB Dock
FZ-VUBN111
Model No.
Printed in Japan
Panasonic System Communications Company
of North America
Two Riverfront Plaza, Newark, NJ 07102, USA
© Panasonic Mobile Communications Co., Ltd. 2018
Thank you for purchasing a Panasonic product.
This product is designed for use with the Panasonic FZ-N1J (hereinafter
referred to as "the unit") (as of January 2018).
● Please read this document carefully before using the product and
keep this document in a safe place for future reference.
● Also thoroughly read the Operating Instructions of the unit.
● Some illustrations in this document may look different from the actual
product.
● Information in this document is subject to change without notice.
Safety precautions
● When using the product for extended periods, do not expose
your skin to the product for a prolonged period.
Generated heat can cause low-temperature burns.
● Do not disassemble, repair, or modify the product.
Doing so may cause a short circuit or overheating, which may result
in a fire or electric shock.
● Do not insert foreign objects into the product.
Doing so may cause a short circuit or overheating, which may result
in a fire or electric shock.
● Do not expose the product to water or other liquids.
Doing so may cause a short circuit, generation of heat, or
overheating, which may result in a fire, electric shock or injury.
● If the product gets wet, contact your technical support representative.
● Do not allow conductive materials such as metal objects to
touch the bus connector terminals. Also, do not touch the
terminals with your hands.
This may result in a fire, burn, or electric shock.
● Do not leave the product in areas with a high concentration of
moisture, steam, dust, oily vapors, etc.
Foreign material that enters the product may cause a fire or electric
shock.
● Make sure not to dock a wet unit in the product.
This may result in a fire or electric shock.
● Do not leave the product in extremely high temperature
environments for an extended period.
Leaving the product where it will be exposed to extremely high
temperatures, such as near fire or in direct sunlight, may deform the
product or cause damage or malfunction to its internal components.
Using the product in these conditions may cause short circuit,
insulation defects, etc., which may in turn cause a fire or electric
shock.
● Do not place the product on an unstable surface.
The product may drop, resulting in injury.
● Make sure to dock the unit in the product using the specified
method.
Otherwise, the unit may drop, resulting in injury.
DHQX1463ZA/J1 C0118-0
Handling and maintenance
Obey the following to ensure proper use and operation of this product.
Operating environment
● Do not leave the product in places under direct sunlight or around
heating appliances.
● Using this product continuously in a hot environment will shorten the
product life.
Handling cautions
● Do not drop the product or subject it to impacts. Doing so may cause
malfunctions or damage.
● If the unit you are using with the product is wet, remove the water by
wiping off the moisture, and thoroughly dry the unit before docking it
in the product.
● If the product gets wet while docking the unit, do not remove the unit
while wet. Remove the water by wiping off the water droplets and
thoroughly dry the unit, the product and the cable before removing
the unit.
Maintenance
● Always disconnect the cable before cleaning the product.
● Clean the product with a soft, dry cloth.
● Do not clean the product with solvents such as benzene, thinner,
alcohol, or kitchen detergent because they may affect the surface of
the product.
● If the bus connector terminals are dirty, network connection may not
be possible. Clean it with a soft, dry cloth.
Other information
Federal Communications Commission Radio
Frequency Interference Statement
Note:
● This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the Panasonic Service Center or an experienced radio/TV
technician for help.
Warning:
● Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Responsible party
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102, USA
Support contact: http://business.panasonic.com/support-computerstablets