Specifications; Safe Operating Requirements - Genz Benz Shuttle 6.0 Owner's Manual

STL6.0-12T COMBO -This model produces 375 watts into the 8 ohm combo configuration and 600 watts when used
with an 8 ohm extension cabinet. It will be necessary to use the Neutrik connection when using an extension cabinet
with this combo. The speaker is our GBE 12300, 12" Neodymium cast frame driver coupled with our GBE 4941 tweeter.
A 100 watt tweeter level control is provided to adjust the output of this component.
STL6.0-210T COMBO -This larger model produces 375 watts into the 8 ohm combo configuration and 600 watts when
used with an 8 ohm extension cabinet. It will be necessary to use the Neutrik connection when using an extension cabi-
net with this combo. The combo is loaded with our GBE 10250, 10" cast frame Neodymium driver coupled with our GBE
4941 tweeter. A 100 watt tweeter level control is provided to adjust the output of this component.
BLOCK DIAGRAM
STL6.0 (head)
Rated Power:
375W/8ohms; 600W/4ohms
Dimensions:
2.5"H X 10"W X 10.50"D
Weight:
3.75 LBS

SAFE OPERATING REQUIREMENTS:

• Never set an amplifier on anything that will tip over or collapse under its weight.
• Provide a minimum distance of 25.4 mm (1 inch) around all sides of the amplifier for sufficient ventilation.
The ventilation should not be impeded by coving the amplifier's vent openings with items such as newspapers,
table-cloths, curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the Shuttle 6.0 amplifier.
• This amplifier should not be exposed to dripping or splashing and no objects filled with liquids, such as vases or
drinks, shall be placed on this product.
• The Shuttle 6.0 amplifier should be connected to a mains socket outlet (power receptacle) with a protective earth
(ground) connection at all times.
• The amplifiers mains plug (power plug) is considered the disconnect device and the connection must remain
accessible at all times.
• This amplifier is capable of producing sound pressure levels that may cause hearing loss.
• There are no user serviceable parts and hazardous operating voltages inside this unit. Always consult a qualified
repair facility for service.

Specifications

STL6.0-12T
Rated Power:
375W /8ohms; 600W /4ohms
Dimensions:
21 3/4"H X 18 3/8"W X 14 1/4"D
Weight:
32 lbs

STL6.0-210T
Rated Power:
375W /8ohms; 600W 4/ohms
Dimensions:
27 3/4"H X 18 3/8"W X 14 1/4"D
Weight:
41 lbs