Genius MousePen 8x6 Quick Installation Manual

Pressure-sensitive tablet plate

RESSURE

Q U I C K I N S T A L L A T I O N G U I D E

HAR DWARE IN STALLA TI ON

To attach the Tablet Plate with a USB interface to the PC, insert the USB

connector into an available USB port on the PC.

Figure 1 Attaching Tablet Plate with a USB Interface to a PC

For Windows XP/ME/2000/98:

Insert the Driver disc into the CD-ROM drive, and wait for the Setup screen to appear.

In most systems, the Setup program will start automatically. If it

doesn't, start the Setup program manually by selecting Start/Run,

and type "E:\setup" (where "E:" represents the location of the

CD-ROM drive), then press the Enter key.

Select the Tablet Driver Setup button and press OK to install the

Tablet Driver. The software will be installed automatically.

Click on the PenSuite Setup button and press OK to install the

PenSuite software. The software will be installed automatically.

-S

ENSITIVE

ABLET

NGLISH

LATE

Table of Contents

Need help?

Do you have a question about the MousePen 8x6 and is the answer not in the manual?

Page 1: Driver Installation
RESSURE ENSITIVE Q U I C K I N S T A L L A T I O N G U I D E HAR DWARE IN STALLA TI ON To attach the Tablet Plate with a USB interface to the PC, insert the USB connector into an available USB port on the PC.
Page 2 1. For the cordless pen (stylus) or the wireless mouse , tap on any surface or press the left button of the mouse to “wake it up”, in case the pen or the mouse has gone to "sleep" after it is not used for a few minutes.