Control Panel; Removing The Left Control Panel - Dell EMC E39S Series Installation And Service Manual

8. Select the TPM Advanced Settings option.
9. From the TPM2 Algorithm Selection option, select SHA256, then go back to System Security Settings screen.
10. On the System Security Settings screen, from the Intel TXT option, select On.
11. Save the settings.
12. Restart your system.

Control panel

Removing the left control panel

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. Remove the air shroud.
4. For ease of removal of the left control panel,
Steps
1. Pull the cable latch and disconnect the control panel cable from the system board connector.
2. Pull the cable latch and disconnect the control panel cable from the system board connector.
3. Using a Phillips #1 screwdriver, remove the screws that secure the cable cover.
Figure 113. Removing the cable cover
4. Using a Phillips #1 screwdriver, remove the screws that connect the control panel to the system.
Figure 114. Removing left control panel
Safety instructions on page 71.
Before working inside your system
remove the cooling fan
on page 72.
#1 to access the cable latch.
Installing and removing system components 163