Husqvarna T535i XP Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Chainsaw
  5. T535i XP
  6. Operator's manual

Husqvarna T535i XP Operator's Manual

Hide thumbs Also See for T535i XP:
Table of Contents

Advertisement

Quick Links

Download this manual
®
T535i XP
EN
Operator's manual
2-31

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna T535i XP

Summary of Contents for Husqvarna T535i XP

  • Page 1 ® T535i XP Operator's manual 2-31...

  • Page 2: Table Of Contents

    Contents Introduction..............2 Troubleshooting............26 Safety................4 Transportation, storage and disposal......27 Assembly..............12 Technical data.............. 27 Operation..............13 Accessories..............29 Maintenance..............18 EC Declaration of Conformity........31 Introduction Product description Intended use This product is a chainsaw model with an electric motor. This product is for professional tree maintenance such as pruning and to disassemble tree crowns.
  • Page 3 9. Rope eyelet Warning! Kickback can occur when the 10. Fan housing guide bar tip touches an object. This causes 11. Chain oil tank the guide bar to be thrown in the direction of the operator. Risk of serious injury or death. 12.

  • Page 4: Safety

    Double insulation. Fail-safe transformer. Use and keep the battery charger indoors only. Safety Safety definitions • Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and The definitions below give the level of severity for each refrigerators.
  • Page 5 • Dress properly. Do not wear loose clothing or • Use power tools only with specifically designated jewellery. Keep your hair, clothing and gloves away battery packs. Use of any other battery packs may from moving parts. Loose clothes, jewellery or long create a risk of injury and fire.
  • Page 6 Kickback is a result of tool misuse and/or incorrect • Turn to your servicing dealer or Husqvarna if you operating procedures or conditions and can be avoided have questions about the operation of the product. by taking proper precautions as given below: We can give you information about how to operate •...
  • Page 7 • Do not try to catch falling sections or make cuts if the keep control of the product. Do not let go of the operator is only attached with one rope. Always use handles! two safety ropes. • During felling operations, lift your hearing protection immediately when the sawing is complete.
  • Page 8 Maintenance and checks of the safety devices on the product on page 19 . • If the safety devices are defective, speak to your Husqvarna servicing dealer. Personal protective equipment Keypad The warning indicator flashes if the chain brake is WARNING: Read the warning instructions engaged or if there is a risk of overload.
  • Page 9 manually. This movement starts a spring-loaded decreases the risk that you or a person near you mechanism that stops the drive sprocket. touches the saw chain. Pull the front hand guard rearward to disengage the chain brake. A kickback can be very sudden and intense. Most kickbacks are small and do not always engage the chain brake.
  • Page 10 Use an approved grounded mains socket that is not damaged. • Do not use other battery chargers than the one supplied for your product. Only use Husqvarna QC chargers when you charge Husqvarna replacement batteries BLi. • Do not try to disassemble the battery charger.
  • Page 11 • Do not connect the battery charger terminals to • Keep the correct depth gauge setting. Obey the metal objects as this can short circuit the battery instructions and use the recommended depth gauge charger. setting. Too large depth gauge setting increases the •...

  • Page 12: Assembly

    Assembly To assemble the guide bar and saw 4. Make sure that the edges of the cutting links are turned forward on the top edge of the guide bar. chain 5. Assemble the drive sprocket cover and steer the chain adjuster pin to the hole in the guide bar. WARNING: Always remove the battery before you assemble or do maintenance on the product.

  • Page 13: Operation

    • Use Husqvarna chain oil for maximum saw chain life To do a function check before you use and to prevent negative effects on the environment. If Husqvarna chain oil is not available, we the product recommend you to use a standard chain oil.
  • Page 14 1. Make sure that the battery is dry. and with large force, which throws the product in the direction of the operator. 2. Put the battery in the battery charger. Kickback always occurs in the cutting plane of the guide bar.
  • Page 15 the product. Second, the force of the kickback must 4. Push on the lower part of the battery until you hear a be large to engage the chain brake. If the chain click. brake is too sensitive, it can engage during rough operation.
  • Page 16 2. Push the battery release buttons and remove the • To cut on the push stroke is when you cut with the battery from the battery holder to prevent accidental top of the guide bar. The saw chain pushes the start.
  • Page 17 Note: A safety strop makes sure that the product does not hit the ground if it falls. CAUTION: The safety strop must only be attached to the rope eyelet. 4. Make sure that there is a carabiner on the other end of the safety strop.

  • Page 18: Maintenance

    • Use a foot loop to keep a safe work position. WARNING: You must engage the chain brake when you lower the product onto its strop. To remove a trapped product 1. Stop the product. 2. Attach the product safely to the tree inboard, against the trunk side, of the cut or a different tool line.
  • Page 19 Maintenance Before Weekly Monthly Clean the chain brake and make sure that it operates safely. Make sure that the chain catcher is not damaged. Replace it if necessary. Turn the guide bar for more equal wear. Make sure that the lubrication hole in the guide bar is not clogged.
  • Page 20 2. Hold the product tight. Put your hands around the 2. Press down the power trigger lockout and make sure handles. that it goes back to its initial position when you release it. 3. Apply full power and tilt your left wrist forward to engage the chain brake.
  • Page 21 Replace a worn or damaged guide bar or saw chain with the guide bar and saw chain combination recommended by Husqvarna. This is necessary to keep the safety Accessories on page functions of the product. Refer to 29 , for a list of replacement bar and chain combinations that we recommend.
  • Page 22 • File position. • Drive link width, mm/in. • Round file diameter. It is not easy to sharpen a saw chain correctly without the correct equipment. Use Husqvarna file gauge. This 959 - 006 - 15.05.2019...
  • Page 23 29 for information about which file and gauge depth gauge. that Husqvarna recommends for your saw chain. 2. Apply the file gauge correctly on to the cutter. Refer to the instruction supplied with the file gauge.
  • Page 24 1. Loosen the bar nut that holds the drive sprocket 2. If the saw chain lubrication is correct, you will see a cover and chain brake. Use the combination wrench. clear line of oil on the surface after 1 minute. 2.
  • Page 25 To do a check of the chain drive To do a check of the guide bar sprocket 1. Make sure that the oil channel is not blocked. Clean if it is necessary. • Examine the chain drive sprocket for wear. Replace the chain drive sprocket if it is necessary.

  • Page 26: Troubleshooting

    7. Turn the guide bar daily to extend its life cycle. Troubleshooting Keypad Possible fault codes on the keypad of the product. LED display Possible faults Possible action Warning indicator flashing. Chain brake engaged. Pull back the front hand guard to re- lease the chain brake.

  • Page 27: Transportation, Storage And Disposal

    Note: The symbol shows on the product or package of storage for long periods. the product. • Put the battery charger in storage in a space that is closed and dry. Technical data Technical data T535i XP Motor Type BLDC (brushless) 36V Features 959 - 006 - 15.05.2019...
  • Page 28 T535i XP Low energy mode savE Lubrication system Type of oil pump Automatic Oil tank capacity, liter/cm 0.20/200 Weight Chainsaw without battery, guide bar, saw chain and empty chain oil tank, kg Water protection level IPX4 Noise emissions Sound power level, measured dB(A)

  • Page 29: Accessories

    The part numbers are given in the table below. Using Husqvarna file gauge will give you the correct If you do not know which saw chain you have on your filing angles. We recommend you to always use a product, turn to your servicing dealer.
  • Page 30 Approved battery chargers Battery charger QC330 QC500 Input voltage, V 100-240 100-240 Frequency, Hz 50-60 50-60 Power, W 959 - 006 - 15.05.2019...

  • Page 31: Ec Declaration Of Conformity

    Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the cordless battery chainsaw Husqvarna T535i XP from 2019’s serial numbers and onwards (the year is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL’S DIRECTIVES:...
  • Page 32 Original instructions 1140982-26 2019-05-17...

Table of Contents