Table of Contents
Advertisement
en
Sensors
H
Sensors
U nbalanced load detection
S e n s o r s
system
The automatic unbalanced load detection
system detects imbalances and ensures
even distribution of the laundry by
repeatedly starting and stopping drum
spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced or
the spin cycle is not performed for safety
reasons.
Note:
Place large and small items of
laundry evenly in the drum.
2
Cleaning and
maintenance
:
Warning
C l e a n i n g a n d m a i n t e n a n c e
Risk of death!
There is a risk of electric shock if touch
live components.
Turn the programme selector to Off. Pull
out the mains plug.
Caution!
Fire and explosion hazard!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
The appliance may be damaged!
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
appliance.
Do not use cleaning agents that contain
solvents.
40
Appliance housing/control
panel
Remove the detergent residue
■
immediately.
Wipe the housing and the control
■
panel with a soft, damp cloth.
Do not use abrasive cloths, sponges
■
or detergents (stainless steel cleaner).
Do not clean the appliance with a
■
water jet.
Drum
Use chlorine-free cleaning agents, do not
use steel wool.
If there are odours in the appliance, or to
clean the drum, run the Drum Clean
90°C programme without laundry.
Descaling
Descaling should not be necessary if the
detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from
customer services.
Emptying the detergent
draw, cleaning the detergent
drawer and its housing
If the appliance contains detergent or
fabric softener residues:
Pull out the detergent drawer. Press
1.
down the insert and fully remove the
drawer.
Advertisement
Table of Contents
