Philips 6100 Series User Manual page 51

TV speakers
You can send the TV sound to a connected audio
device - a Home Theater System or audio system.
With TV speakers, you select where you want to hear
the TV sound and how you want to control it.
• If you select Off, you permanently turn off the TV
speakers.
• If you select On, the TV speakers are always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound to
the audio device. The TV will turn off the TV speakers
when the device is playing the sound.
• If you select EasyLink autostart, the TV will turn on
the audio device, send the TV sound to the device
and turn off the TV speakers.
With EasyLink or EasyLink autostart selected, you
can still switch to TV speakers or device speakers in
the Picture and sound menu.
To set the TV speakers . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > TV
speakers.
3 - Press  (right) and select Off, On, EasyLink or
EasyLink autostart.
4 - Press  , repeatedly if necessary, to close the
menu.
To switch speakers directly . . .
1 - While watching TV, press  .
2 - Select Speakers then
device).
3 - Press  , repeatedly if necessary, to close the
menu.
Clear sound
With Clear sound, you improve the sound for speech.
Ideal for news programs. You can turn the speech
improvement on or off.
To turn on or off . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Clear
sound.
3 - Press  (right) and select
4 - Press  , repeatedly if necessary, to close the
menu.
HDMI ARC
If you do not need an Audio Return Channel (ARC) on
any of the HDMI connections, you can turn the ARC
signal off.
TV or Amplifier (audio
On or Off.
For more information, press
up HDMI ARC.
Audio Out format
With Audio Out format you can set the audio out
signal of the TV to fit the sound processing
capabilities of your Home Theater System.
For more information, press
up Audio Out format.
Audio Out leveling
With Audio Out Leveling you can level the sound
volume of the Home Theater System with the volume
of the TV when you switch from one to the other.
For more information, press
up Audio Out Leveling.
Audio Out delay
If you set an Audio sync delay on your Home Theater
System, to synchronize the sound with the picture,
you must turn off Audio Out delay on the TV.
For more information, press
up Audio Out Delay.
Audio Out offset
If you cannot set a delay on the Home Theater
System, you can set a delay on the TV with Audio Out
offset.
For more information, press
up Audio Out Offset.
TV placement
As part of the first installation, this setting is set to
either On a TV stand or Wall mounted.If you have
changed the placement of the TV since then, adjust
this setting accordingly for best sound reproduction.
 and select Setup and press OK.
1 - Press
2 - Select TV settings > General settings > TV
placement and press OK.
3 - Select On a TV stand or Wall mounted and press
OK.
 , repeatedly if necessary, to close the
4 - Press
menu.
51

Keywords and look

Keywords and look

Keywords and look

Keywords and look

Keywords and look