Cleaning The Print Head Using The Product Control Panel - Epson WorkForce Pro WF-M5299 User Manual
Hide thumbs
Also See for WorkForce Pro WF-M5299:
- Start here (4 pages) ,
- User manual (136 pages) ,
- Instruction booklet (16 pages)
Table of Contents
Advertisement
Parent topic:
Related tasks
Removing and Installing Ink Packs
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the
4. Select Maintenance > Print Head Cleaning.
You see a screen like this:
5. Select Start to clean the print head.
When the cleaning cycle is finished, you see a message on the screen.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
6. Select Check to print a nozzle check pattern and confirm that the print head is clean.
Print Head Maintenance
home button, if necessary.
165
Advertisement
Table of Contents
Need help?
Do you have a question about the WorkForce Pro WF-M5299 and is the answer not in the manual?
Questions and answers
INKJET CARTRIDGE JAMED IN CANNOT RELEASE
The provided context does not contain specific information on fixing an inkjet cartridge jam in the Epson WorkForce Pro WF-M5299. However, general troubleshooting steps for such issues include:
1. Turn off the printer and unplug it from the power source.
2. Open the printer cover carefully.
3. Check for any jammed ink cartridges and gently reposition them if needed.
4. Remove any obstructions or debris inside the cartridge area.
5. Reinstall the ink cartridges securely.
6. Close the printer cover and turn the printer back on.
7. Run a printer test to check for errors.
If the problem persists, refer to the printer's user guide for further instructions.
This answer is automatically generated