Equinox Systems FUSION SPOT MAX MKII User Manual page 4

SHND
SOUN
SENS
LED
DISP INVERT
PAN INVERT
TILT INVERT
TEST
VER
RSET
DMX Address Setting
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to choose the address
to confirm. To go back to the functions without any changes press the
MENU button again. Press and hold the MENU button for one second or
wait for one minute to go back to the main menu.
Channel Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
SH1
SH2
SH3
SH4
ON
OFF
000-100
ON
OFF
YES
NO
YES
NO
Self-Test
Software Version
RSET
. Press the ENTER button and the
. Press the ENTER button and the
(1 Channel) mode, (8 Channel) mode or
Once the mode has been selected, press the ENTER button to confirm. To
go back to the functions without any changes press the MENU button
again. Press and hold the MENU button for one second or wait for one
minute to go back to the main menu.
Master Mode or
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
(Slave 1), (Slave 2) or
been selected, press the ENTER button to confirm. To go back to the
functions without any changes press the MENU button again. Press and
hold the MENU button for one second or wait for one minute to go back
to the main menu.
Show Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
(show 1) or (show 2) or
Once the mode has been selected, press the ENTER button to confirm. To
go back to the functions without any changes press the MENU button
again. Press and hold the MENU button for one second or wait for one
minute to go back to the main menu.
Sound Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
(10 Channel) mode.
Slave Mode
. Press the ENTER button and the
(Master) mode. Once the mode has
. Press the ENTER button and the
(show 3) or (show 4) mode.
. Press the ENTER button and the