Philips HR1931 User Manual page 8

ENGLISH
10
Note: Only slowly process smaller amounts at once.
Important: You can process 500 grams of sorbet before you need to empty the
pulp container.
Cleaning (Fig. 17)
-
The appliance is easier to clean if you do so immediately after use. Look at the
cleaning table to see how all parts can be cleaned.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as
alcohol, petrol or acetone to clean the appliance.
Note: All detachable parts are dishwasher-safe and can be safely cleaned under
the tap.
1 Switch off the appliance and remove the plug from the wall socket.
2 Open the locking clamp (Fig. 18).
3 Slide the juicing unit off the motor unit (Fig. 19).
4 Remove the pulp container from the motor unit (Fig. 20).
5 Empty the pulp container and rinse it under the tap.
Disassembling and cleaning the juicing unit
1 Remove the pusher from the feeding tube (Fig. 21).
2 Remove the berry tray from the feeding tube (Fig. 22).
3 Turn the juice collector anticlockwise until the arrow (
indication and remove it from the juicing unit. (Fig. 23)
4 Remove the two-part filter and disassemble it (Fig. 24).
5 Remove the juicing screw or sorbet screw (Fig. 25).
6 Turn the pulp outlet anticlockwise until the arrow (
indication and remove it from the juicing unit. (Fig. 26)
Storage
1 Wind the mains cord around the cord storage facility in the base of the motor
unit (Fig. 27).
2 You can store the pusher, the juice jug and lid, and the berry tray in the pulp
container (Fig. 28).
Recycling
-
Do not throw away the product with the normal household waste at the end of
its life, but hand it in at an official collection point for recycling. By doing this, you
help to preserve the environment.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service or go to your
Philips dealer. You can also contact the Philips Consumer Care Centre in your
country.
) points to the 'open'
) points to the 'open'