Related Manuals for Samsung 693 Series
Summary of Contents for Samsung 693 Series
- Page 1 LED TV Installation manual Thank you for purchasing Samsung product. To receive more service, please register your product at www.samsung.com Model Serial No.
- Page 2 Failing to do so may result in a fire or problems with the TV caused by an increase in its internal temperature. ✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only. – If you use parts provided by another manufacturer, it may cause a problem with the product or cause the product to fall, leading to serious injury.
-
Page 3: Table Of Contents
Contents • Accessories ..................................4 • Using the TV's Controller ............................5 • The Connection Panel ..............................6 • Connecting to the Network ............................8 • Connecting the TV to an SBB or STB ......................... 10 • Connecting a Pillow Speaker ............................12 •... -
Page 4: Accessories
Accessories ✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎ The items’ color and shape may vary, depending on the model. List of Parts Safety Guide / Quick Setup Guide / Regulatary Guide Power Cord (Not available in some locations) English... -
Page 5: Using The Tv's Controller
Using the TV's Controller ✎ The color and shape of the TV Controller may vary depending on the model. ✎ The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control. -
Page 6: The Connection Panel
HDMI 1.2 version, contact to the Samsung customer care center. Refer to page 46 for the information of the Samsung customer care center. - Page 7 EX-LINK Connect this jack to the jack on the optional RJP (Remote Jack Pack). This will allow you to connect external devices (Camcoder, PC, DVD players etc.) easily. ANT IN (AIR/CABLE) – To view television channels correctly, the TV must receive a signal from one of the following sources: –...
-
Page 8: Connecting To The Network
• Authentication Modes: WEP, WPAPSK, WPA2PSK • Encryption Types: WEP, TKIP, AES In compliance with the newest Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802.11n mode. If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC (Push Button Configuration) or a PIN (Personal Identification Number). - Page 9 Network Connection - Wired There are three main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below: TV Rear Panel The Modem Port on the Wall External Modem (ADSL / VDSL / Cable TV) Modem Cable (Not Supplied) LAN Cable (Not Supplied) The Modem Port on the Wall...
-
Page 10: Connecting The Tv To An Sbb Or Stb
Connecting the TV to an SBB or STB TV Rear Panel ETH MODEM Data Cable 1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable. ✎ The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type. English... - Page 11 • Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV. Confirm the code on the Code Label Note the labeled end. Note the labeled end. SI Vendor Cable code Pin assign Remark Samsung BN39-00865B Enseo Guest-Tek NXTV BN39-01011B nStreams BN39-01110A Sonifi BN39-01011E ✎...
-
Page 12: Connecting A Pillow Speaker
– This speaker is only compatible with a specified IR code. You can change the code in the Hospital mode setup menu. – The TV gives priority to the Samsung remote control over the pillow speaker's wired remote control. – Option: Channel Menu Display. - Page 13 Connecting the Audio Output to an Audio Amplifier TV Rear Panel AUDIO IN Audio Amplifier 1 Stereo cable 1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable. English...
-
Page 14: Connecting The Rjp (Remote Jack Pack)
[HDMI] port of the TV to the HDMI port of the RJP. 3. Connect the EX-LINK port of the TV to the RS/232 port of the RJP. ✎ This Samsung TV is compatible with the TeleAdapt TA-7610 RJP only. English... - Page 15 • RJP (Remote Jack Pack): The RJP is a hardware module that has various Audio and Video inputs (A/V Video, A/V Audio, PC and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP communicates with the TV via RS232.
-
Page 16: Setting The Hotel Option Data
After a menu appears, follow these general directions to navigate and change values: – Use the directional buttons on the Samsung remote to move from menu item to menu item. – Press the SelectE to select a menu item. The screen displays that menu item only. - Page 17 • Interactive mode: TV works with an SI STB or SBB. Mode • Standalone mode: TV works alone, without an SI STB or SBB. • Interactive mode: Samsung / Telehealth / MTI / Innvue SI Vendor SI Vendor • Standalone mode: OFF / SSCP Set the Power On values that will be applied when the TV is turned.
- Page 18 Hotel TV Function Description Category Item This Feature enables showing/browsing all antenna type (Air/Cable) channels at the same time. • ON: When ON, guests can access the complete Channel Map irrespective of the selected antenna type. The Channel list will also populate Air as well Cable type channels. Mixed Channel Map •...
- Page 19 • CZ: the type of Zenith IR Code and 12V Vcc • CP: the type of Philips IR Code and 5V Vcc Pillow Speaker • CS: the type of Samsung IR Code and 12V Vcc Select the speaker where the TV sound is outputted. Speaker Select •...
- Page 20 Hotel TV Function Description Category Item Clone TV to USB Clone the current TV options to a USB memory device. Clone USB to TV Clone the saved TV options on a USB memory device to the TV. Cloning If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV menu items Setting Auto Initialize are restored again to their values cloned initially.
- Page 21 Lets you upgrade the TV SW with a USB memory stick. If the Samsung Sound Bar device is connected to this TV, this item lets you to select where the TV sound is outputted when the TV is turned on.
- Page 22 Hotel TV Function Description Category Item You can turn on or off the REACH RF Mode. When set to On, the TV can operate with the REACH REACH RF Mode Server (Modulator) through the RF channel (DTV cable). You can turn on or off the REACH IP Mode. When set to On, the TV can operate with the REACH IP REACH IP Mode Server through the IP network.
- Page 23 Welcome Message The Welcome Message feature displays a custom message on the TV every time it is turned on. – Welcome message settings are in the Hotel Option Menu. – Set Welcome Message to ON to display the message when the TV is powered on. Welcome Message Edit Welcome Message Hospitality Logo...
- Page 24 Hotel Logo The Hospitality Logo function displays the Hotel's picture image when the TV is powered on. – Hospitality Logo settings are the Hotel mode menus. – The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. –...
- Page 25 USB Cloning The USB Cloning function lets you download user-configured settings (Picture, Sound, Channel, Setup, and Hotel Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you create a standard file of settings and distribute that standard file to all the TVs in your facility.
- Page 26 Sub Item Cloned or not Standalone / Interactive Hospitality Mode Default: Standalone Interactive mode: Samsung / Telehealth / MTI / Innvue SI Vendor Standalone mode: OFF / SSCP Power On Channel User Defined / Last Saved Power On Channel Num...
- Page 27 Self Diagnosis STB SI Vendor Setting Si Name Ok/Failure for HTV Ok/Failure System Software Update Sound Bar Out On / Off Contact Samsung ― Standby LED On/Off TV Reset ― Home Menu Display On / Off Home Menu Home Menu Editor ―...
- Page 28 Multi Code Remocon A Multi Code Remocon is a special remote which is designed to control multiple TVs. This function is useful where there is more than one TV in a location. You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID numbers are displayed on each TV's OSD.
- Page 29 Setting Auto Initialize When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture, Sound, Input, Channel, Setup, and Hotel Setup. This lets you set nearly all of the menu values on your hospitality TVs to the same, standard settings.
- Page 30 Menu Item Sound Output Sound Mode Balance Equalizer HDMI Input Audio Format Sound Digital Output Audio Format Expert Settings Audio Delay Auto Volume Sound Feedback Welcome Sound Audio Options Preferred Language Auto Tuning Settings Standby Auto Tuning Digital Text (MHEG) Broadcasting Primary Teletext Language Expert Settings...
- Page 31 NONE SD_MEXICO SD_CANADA If you don't change the country of the Current Location. Next Welcome to Samsung TV! Select your language to start the on screen setup. Bienvenue! Use the Up and Down buttons to change the Welcome! language. Bienvenido! Select your language.
- Page 32 – If you select the incorrect country, execute TV Reset again after entering the System section of the Hotel Menu. – Before select country, refer to the country list information on the right. • Welcome to Samsung TV! OSD – Initially highlighted: Welcome (English) –...
- Page 33 USB Software Upgrade Method Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hot line at 1-866-894- 0524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive containing the upgrade to the USB port located on the TV.
- Page 34 Channel Bank Editor (Smoovie TV Only) The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to. The Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each bank.
- Page 35 5. Edit the Channel Bank. An example is below. a. Bank1 (Free channel): Select the channels that will be accessible when a remote doesn’t have a card. b. Bank2 (Family Card - Green): Select the channels that will be accessible when a remote has a GREEN CARD. c.
- Page 36 Channel Editor The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can: – Change the channel numbers and names, manage genre and language groups and delete channels. – Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen.
- Page 37 • Edit Channel Number Use Edit Channel Number to change the channel number of a channel you select. To change a channel number, follow these steps: Edit Channel Number 1. Select a channel on the Channel Edit screen. 2. Use the directional button to move Edit Channel Number, and SelectE ABC HD_ button.
- Page 38 The external sources of this TV are displayed in the last page of the Channel Editor menu as shown in the example below. In the example, there are two external sources connected to the TV, HDMI2 and AV. – You can assign a new channel to an external source at end of list, selecting Edit Channel Number, and then using the directional buttons on the remote control to select the channel number of the channel.
-
Page 39: Installing The Wall Mount
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own. - Page 40 Samsung is not liable for these kinds of accidents. – Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
-
Page 41: Anti-Theft Kensington Lock
Refer to the manual provided with the Kensington Lock for additional information on proper use. The Kensington Lock is not supplied by Samsung. ✎ Please find the “K” icon on the rear of the TV. A Kensington slot is beside the “K”... -
Page 42: Specifications
Specifications Environmental Considerations Operating Temperature 50°F to 104°F (10°C to 40°C) Operating Humidity 10% to 80%, non-condensing Storage Temperature -4°F to 113°F (-20°C to 45°C) Storage Humidity 5% to 95%, non-condensing Model Name HG32NF693 HG40NF693 Display Resolution 1920 x 1080 1920 x 1080 Screen Size 32˝... -
Page 43: Display Resolution
Display Resolution When you use your TV as a computer monitor, you can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose. Horizontal Frequency Vertical Frequency Pixel Clock Frequency Sync Polarity Mode Resolution... -
Page 44: Dimensions
Dimensions Front view / Side view HG32NF693 29.2 27.6 17.2 15.5 (Unit: inches) HG40NF693 36.3 34.6 20.9 19.2 (Unit: inches) English... - Page 45 HG43NF693 38.8 37.1 22.6 20.9 (Unit: inches) HG49NF693 44.0 42.4 25.6 23.9 (Unit: inches) Jack panel detail / Rear view ✎ Detailed dimensions can be checked at Displaysolutions.samsung.com. English...
- Page 46 (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
- Page 47 Open Source License Notice Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English. THIS PRODUCT IS SOLD WITH A LIMITED LICENCE AND IS AUTHORISED TO BE USED ONLY IN CONNECTION WITH HEVC CONTENT THAT MEETS EACH OF THE THREE FOLLOWING QUALIFICATIONS: (1) HEVC CONTENT ONLY FOR PERSONAL USE;...
- Page 48 NOTE TO CABLE TV INSTALLER This reminder is provided to call the cable TV system installer's attention to Article 820–40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
- Page 49 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Samsung Hospitality Hotline 1-866-sam4biz (US) 1-800-749-0205 (CANADA) 1-800-726-7864 (MEXICO) Web site: http://www.samsung.com/us/business © 2017 Samsung Electronics America, Inc...