Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fujitsu ESPRIMO P556
Summary of Contents for Fujitsu ESPRIMO P556
- Page 1 System Operating Manual ESPRIMO P556 ESPRIMO PH556...
- Page 2 Thank you for buying an innovative product from Fujitsu. Latest information about our products, useful tips, updates etc. is available on our website: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: •...
- Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2015. All rights reserved. Publication Date 08/2015 Order No.: A26361-K1502-Z320-1-7619, edition 1...
- Page 5 ESPRIMO P556 ESPRIMO PH556 Operating Manual Your ESPRIMO Important notes Getting started Operation Troubleshooting and tips System expansions Technical specification Index...
- Page 6 Trademarks Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited or its subsidiaries in the United States of America and other countries. Kensington, MicroSaver and K-Slot are registered trademarks of ACCO Brands.
-
Page 7: Table Of Contents
Installing new software ..............26 Fujitsu... - Page 8 Index ................. . 44 Fujitsu...
-
Page 9: Your Esprimo
• in your operating system documentation in the information files (e.g. *.PDF, *.HTML, *.DOC, *.CHM, *.TXT, *.HLP) • Validity of the Reference Manual This Reference Manual is valid for the following systems: • ESPRIMO P556 • ESPRIMO PH556 Fujitsu... -
Page 10: Notational Conventions
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:... -
Page 11: Important Notes
If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site. Fujitsu... -
Page 12: Cleaning The Device
Use disinfectant wipes to clean the keyboard and the mouse. Energy saving, disposal and recycling Disposal Energysaving Recycling Drivers& UtilitiesDVD User DocumentationDVD You can find information on these subjects in the "Environment and Energy Information" manual or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Fujitsu... -
Page 13: Ce Marking
CE nnnn (!) ; nnnn: For digits and exclamation mark (!), see label on the product. You can find more information and declarations of conformity on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates". This equipment can be used in the following countries: Belgium... -
Page 14: Fcc Compliance Statement
• Consult the dealer or an experienced radio/TV technician for help. Fujitsu not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu. The correction of interferences caused by such unauthorized modification, substitution or attachment will be the responsibility of the user. -
Page 15: Getting Started
Drives and boards If you have received drives or boards with your device, please do not install them until after first-time setup. How to install drives and boards is described in the "System expansions", Page 28 chapter. Fujitsu... -
Page 16: Setting Up The Device
Operating position Use the device only in the vertical operating position. Connecting the device to the mains supply Mainsadapter ► Connect the power cable to the device (1). ► Plug the power plug into a grounded mains outlet (2). Fujitsu... -
Page 17: Connecting External Devices
PS/2 mouse port, green Keyboard port, purple Mouseport PS/2mouseport Keyboardport e-SATA port S/PDIF port e-Sata S/PDIF Serial port, turquoise DisplayPort Serialport Some of the peripherals require special software (e.g. drivers) (refer to the documentation for the peripheral and operating system). Fujitsu... -
Page 18: Connecting A Monitor
► Switch your device off. ► Plug the round plug of the keyboard cable into the keyboard port on the device. Keyboard, ► Switch your device on again. Fujitsu... -
Page 19: Connecting External Devices To The Serial Interface
The external USB devices you connect to the USB ports usually require no driver of their own, as the required software is already included in the operating system. If the device requires separate software, please note the information in the manufacturer’s manual. Fujitsu... -
Page 20: Switching On For The First Time: Installing The Software
Plan a reasonable amount of time for this, as this process must not be interrupted. You may need the licence number for Windows during the installation. You can find the licence number as a label on your device (no longer applies to Windows 8 or higher). Fujitsu... -
Page 21: Switching On Monitor And Device
Help in your operating system. You will find more information on the system, as well as drivers, utilities and updates on the "Drivers & Utilities" DVD and on the Internet at "http://www.fujitsu.com/fts/support". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com". -
Page 22: Operation
The main switch and the ON/OFF switch do not disconnect the device from the mains voltage. To completely disconnect from the mains voltage, remove the power plug from the power socket. ► If necessary, switch the monitor off (see the operating manual for the monitor). Fujitsu... -
Page 23: Indicators On The Device
ON/OFF switch, the device powers up or returns to the state it was in before it entered energy-saving mode. • The indicator is not lit: The device is switched off. Hard disk indicator The indicator lights up when the hard disk drive of the device is accessed. Fujitsu... -
Page 24: Keyboard
With some keyboards the ON/OFF switch can only be used with an ACPI (Advanced Configuration and Power Management Interface). Otherwise the key is inoperative. The mainboard must support this function. Keys, Keys, Keys, Enter key confirms the highlighted selection. The Enter key is also referred to as the "Return" key. Fujitsu... -
Page 25: Settings In Bios Setup
In BIOS Setup, you can set the system functions and the hardware configuration of the device. When the PC is delivered, the default entries are valid (see "BIOS Setup" manual or manual for the mainboard). You can customise these settings to your requirements in the BIOS Setup. Fujitsu... -
Page 26: Property And Data Protection
(2) and a padlock and chain which you have connected to a fixed object beforehand. Lead-sealing To prevent unauthorised persons from opening the system unit, the casing can be lead-sealed. To do this, feed the sealing chain through the holes (2) and seal the chain with the lead seal. Fujitsu... -
Page 27: Bios Setup Security Functions
You will find a detailed description of the Security menus and how to assign passwords in the manual for the mainboard or in the "BIOS Setup" manual. Access authorisation via SmartCard Securityfunctions Accesspermission,SmartCard In systems equipped with a SmartCard reader, access can be restricted to those users who have a corresponding SmartCard. Fujitsu... -
Page 28: Troubleshooting And Tips
► For further clarification of the problem, contact the Service Desk for your country (see the Service Desk list or visit the Internet at "http://support.ts.fujitsu.com/contact/servicedesk"). When you do this, please have ready the identity number and serial number of your system. -
Page 29: The Device Cannot Be Switched Off With The On/Off Switch
► Restart the system. Incorrect setting for the monitor ► Press while the system is booting. ► Start the system in Safe Mode. ► Set up the monitor as described in the documentation for your operating system and monitor. Fujitsu... -
Page 30: No Mouse Pointer Displayed On The Screen
Installing new software When installing programs or drivers, important files may be overwritten and modified. To be able to access the original data in the event of any problems following installation, you should backup your hard disk prior to installation. Fujitsu... -
Page 31: Restoring Hard Disk Contents
"Recovery DVD" (delivered with your system). Tips Topic Out of system resources ► Close unnecessary applications. ► Run the applications in a different order. Other manuals Further manuals are provided as PDF files on the "Drivers & Utilities" DVD. Fujitsu... -
Page 32: System Expansions
An update of the BIOS may be required for a system expansion or hardware upgrade. Further information can be found in the BIOS help section or if necessary in the Technical Manual for the mainboard. Fujitsu... -
Page 33: Information About Boards
The equipment and tools you use must be free of static charges. • Only touch or hold the boards by the edge or, if present, at the areas marked green (Touch Points). • Never touch pins or conductors on boards fitted with ESDs. Fujitsu... -
Page 34: Opening The Casing
► Remove any connected wires which are in the way. ► Lay the device on its side in the manner shown below. ► Remove the casing screws (1). ► Slide the side cover from the casing in the direction of the arrow (2). Fujitsu... -
Page 35: Closing The Casing
• two drive bays for non-accessible 3 " or 2 " drives. "Accessible drives" are e.g. DVD or CD ROM drives, into which a data medium can be inserted from outside. "Non-accessible drives" are for example hard disk drives. Fujitsu... -
Page 36: Installing And Removing The Accessible 5
► If there is an accessible drive, please remove it (see "Removing an accessible drive", Page 32). ► Remove the front panel from the casing. ► From the inside, press the plastic drive cover out of the front panel. Fujitsu... - Page 37 ► Plug the data and the power supply connectors into the drive. Make sure the polarity is correct. ► If there is an accessible drive, please install it again. ► Close the casing (see "Closing the casing", Page 31). Fujitsu...
-
Page 38: Installing And Removing An Accessible 3
► Slide the drive into the casing (1). Make sure that the screw holes are aligned. ► Fasten the drive into place with the screws (2). ► Plug the data and the power supply connectors into the drive. Make sure the polarity is correct. Fujitsu... -
Page 39: Removing An Accessible Drive
► Disconnect all cables connected to the drive (data cable, power supply cable). ► Remove the screws (1). ► Slide the drive out of the bay from behind, in the direction of the arrow (2). ► Close the casing (see "Closing the casing", Page 31). Fujitsu... -
Page 40: Installing And Removing The Hard Disk Drive
► Close the casing (see "Closing the casing", Page 31). It may be necessary to modify the entry for the remaining drives in the BIOS Setup. You will need a SATA cable to install a second hard disk on the listed device variants. Fujitsu... -
Page 41: Installing A Hard Disk Drive
► Press gently against the hard disk drive from below and secure it with the screws (2). ► Connect the cables (data cable, power supply) to the drive. Check that the polarity is correct and do not use any force. ► Close the casing (see "Closing the casing", Page 31). Fujitsu... -
Page 42: Installing And Removing A Board
► Remove the cover plate from the casing in the direction of the arrow (2). ► Remove the screw on the slot cover (1). ► Pull the slot cover out of the slot in the direction of the arrow (2). Fujitsu... -
Page 43: Board Removing
PCI board documentation. Board removing ► Open the casing (see "Opening the casing", Page 30). Board, ► Remove the cover plate (see "Board installing", Page 38). ► Disconnect the cables connected to the board. Fujitsu... - Page 44 For cooling, protection against fire, and in order to comply with EMC (electromagnetic compatibility) regulations, you must refit the slot cover. ► Slide the slot cover into the slot (1). ► Secure the slot cover in position with the screw (2). ► Secure the cover plate on the casing again. Fujitsu...
-
Page 45: Mainboard Expansions
"Closing the casing", Page 31). Processor, replacing ► Open the casing (see "Opening the casing", Page 30). Processor,replacing ► Upgrade the processor according to the description in the manual for the mainboard. ► Close the casing (see "Closing the casing", Page 31). Fujitsu... -
Page 46: Replacing The Lithium Battery
► Press the catch in the direction of the arrow (1). The battery jumps out of the holder slightly. ► Remove the battery (2). ► Push the new lithium battery of the identical type into the holder (3) and press it down until it engages. Fujitsu... -
Page 47: Technical Specification
Clearance required to ensure adequate ventilation: without air vents min. 10 mm / 0.39 inch with air vents min. 200 mm / 7.87 inch The data sheet for this device provides further technical data. The data sheet can be found on our website "http://www.fujitsu.com/fts". Fujitsu... -
Page 48: Index
USB keyboard 14 Contents of delivery 11 Hard disk drive, Ctrl+Alt+Del 21 installing 36–37 Cursor keys 20 removing 36 replacing 36 Headphones 13 Data protection 22 Device indicators 19 Important notes 7 Ports 13 Indicators, setting up 12 device 19 Fujitsu... - Page 49 Line out 13 Lithium battery 41 Lithium battery, replacing 42 Recycling 8 Low voltage directive 9 Replacing, lithium battery 42 Replacing, lithium battery 42 Retransportation 7–8 Main memory 41 Main memory, upgrading 41 Mainboard Safety information 7 Upgrades 41 Fujitsu...
- Page 50 15 Setup, connecting keyboard 14 see BIOS Setup 21 connecting the mouse 14 Software, User Documentation DVD 8 installing 16–17 System expansion 28 System settings, Workstation 12 BIOS Setup 21 System unit, see Device 8 Transportation 7–8 Fujitsu...
Need help?
Do you have a question about the ESPRIMO P556 and is the answer not in the manual?
Questions and answers