Cannot Send Faxes At A Specified Time; Cannot Receive Faxes; Cannot Save Received Faxes To A Memory Device - Epson Workforce Pro WF-C8610 Series User Manual

User's Guide
"Sending Faxes Dialing from the External Phone Device" on page 123
&
"Managing Contacts" on page 44
&
"Cannot Send or Receive Faxes" on page 219
&

Cannot Send Faxes at a Specified Time

Set the date and the time correctly on the control panel.
Related Information
"Sending Faxes in Monochrome at a Specified Time (Send Fax Later)" on page 127
&
"Basic Settings" on page 47
&

Cannot Receive Faxes

❏ If you have subscribed to a call forwarding service, the printer may not be able to receive faxes. Contact the
service provider.
❏ If you have not connected a telephone to the printer, set the Receive Mode setting to Auto on the control panel.
❏ Under the following conditions, the printer runs out of memory and cannot receive faxes. See the
troubleshooting for information on handling a memory full error.
❏ 200 received documents have been saved in the inbox and the confidential box in total.
❏ The printer's memory is full (100%).
❏ When receiving faxes using the subaddress feature, check that the subaddress and password are correct. Check
with the sender that the subaddress and password match.
❏ Check if the sender's fax number has been registered to the Rejection Number List. Faxes sent from numbers
that have been added to this list are blocked when Rejection Number List in Rejection Fax is enabled.
❏ Check if the sender's fax number is registered in the contact list. Faxes sent from numbers that have not been
registered to this list are blocked when Unregistered Contacts in Rejection Fax is enabled.
❏ Ask the sender if header information is setup on their fax machine. Faxes that do not include header
information are blocked when Fax Header Blank in Rejection Fax is enabled.
Related Information
"Cannot Send or Receive Faxes" on page 219
&
"Memory Full Error Occurs" on page 222
&
"Receiving Faxes from a Board with a Subaddress (SEP) and Password (PWD) (Polling Receive)" on page 133
&

Cannot Save Received Faxes to a Memory Device

Check if the memory device is connected to the printer, and then check the Receive Settings.
Solving Problems
221